Abstract:Platelet to fiber transition and associated property changes of expanded vermiculite in polar PLA and non‐polar PP matrices The morphological transformation of expanded vermiculite (VC) during injection molding with brittle PLA and ductile PP polymers along with its positive and negative contribution to mechanical response is investigated. Polymer/VC mixtures with 30 wt. % VC are prepared by thermokinetic high shear mixing at 4000 rpm without any ex‐situ exfoliation agents or compatibilizers. Obtained composite mixtures are then injection molded onto three‐point bending and tensile test specimens. Performed mechanical tests suggested a significant increase in tensile (110%) and flexural modulus (112%) of PP30VC samples. Presented fractographic and morphological investigations suggested that the root cause of measured improved tensile (36%) and bending strength (26%) of PP is the fibrillation of VC associated with PP/VC interactions under high shear. A similarly increasing trend for tensile (147%) and bending modulus (137%) was observed for PLA30VC samples. Contrary to PP30VC, a decreasing pattern was present in the case of tensile (−40%) and bending strength (−13%) of PLA30VC. The root cause for such reduction is determined to be (i) in situ exfoliation of VC inside PLA matrix and transformation of VC into micrometer‐sized platelets; (ii) evaporation of trapped water/crystalline water in the interlayer region of VC which caused in situ degradation of PLA during manufacturing. Highlights Vermiculite‐loaded PP and PLA composites are produced at high shear. Composites have superior modulus compared to neat polymers. Fibrillation of platelet vermiculite is observed in only the PP matrix.

Novel polylactide/vermiculite nanocomposites by in situ intercalative polymerization. I. Preparation, characterization, and properties

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Progress in Nanocomposites of Polylactic Acid

Improve the thermal and mechanical properties of poly(L-lactide) by forming nanocomposites with pristine vermiculite

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Crystallization Behavior and Water Vapor Permeability of Poly(Lactic Acid) Nanocomposite under Oscillatory Shear

Preparation and Structure of Polystyrene/Montmorillonite Nanocomposite

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Preparation, Structure, And Performance Of Poly(Lactic Acid)/Vermiculite-Poly(Lactic Acid)-Beta-Cyclodextrin Inclusion Complex Nanocomposites

Effect of Vermiculite Dispersion in Poly(lactic Acid) Preparation and Its Biodegradability

Preparation And Characterization Of Poly(Vinyl Chloride)/Layered Double Hydroxides Nanocomposite Via In Situ Suspension Polymerization

Preparation of Poly(Methylmethacrylate)/Layered Double Hydroxides Nanocomposites Via in Situ Solution Polymerization

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Morphological adaptation of expanded vermiculite in polylactic acid and polypropylene matrices for superior thermoplastic composites

Preparation and characterization of poly(vinyl chloride)/layered double hydroxides nanocomposite viain situ suspension polymerization

Poly(lactic Acid)/vermiculite‐ G ‐polyisoprene Nanocomposites Based on Thiol‐ene Click Chemistry: Performance, Shear Crystallization and Rheonaut Technology Analysis

Direct Preparation of High Thermal Stable PLA-Based Nanocomposite via Extra-Low Loading of In Situ Exfoliated Ultrathin MWW Zeolite Nanosheets

Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: Reinforcing effects and toughening mechanisms

Performance, crystallization and rheological behavior of poly(lactic acid)/N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride intercalated vermiculite grafted poly(acrylamide) nanocomposites

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites