Abstract:Nano-materials are increasingly being used as modified binder for improve the performance of cementitious materials. In this paper, nano-SiO2 and nano-Al2O3 were incorporated into the geopolymers formed by the mixture of construction solid waste (recycled concrete fine powder) and industrial solid waste (slag). The effects of the type and content of nanomaterials on the early reaction kinetics, physical and mechanical properties and microstructure of geopolymer composites were explored. Results show that the addition of nanomaterials mainly affected the dissolution stage of geopolymerization, played a nucleation effect and improved the reaction rate. The promotion effect of nano-Al2O3 was slightly greater than that of nano-SiO2. Based on the results of JMAK model, the formation of geopolymers composites was an one-dimensional heterogeneous nucleation control reaction, which followed a plate-like structure thickening mechanism. The addition of nanomaterials shortened the setting time. The incorporation of nano-Al2O3 was beneficial to improve the fluidity of geopolymer. Furthermore, the addition of the two nanomaterials could improve the compressive strength of geopolymers. The compressive strength tended to first increase and then decrease with increasing nano-SiO2 or nano-Al2O3 content. The optimal mixing ratio of nano-silica and nano-alumina were 1.2% and 1.6% respectively, and the 28-day compressive strengths were both 59.05 MPa, which were 23.35% higher than that without nano-materials. XRD and SEM-EDS analysis indicate that the incorporation of nanomaterials had no impact on the type of final products, but increased their number, particularly calcium-based gel products. The internal structure of geopolymer with nanomaterials was more dense and uniform than that without nanomaterials. The MIP observed that the addition of the two nano-materials reduced the porosity in the matrix, the number of macropores and the pore fractal dimension. The pore fractal dimension of geopolymer was negatively correlated with the compressive strength.

Effect of Vermiculite Dispersion in Poly(lactic Acid) Preparation and Its Biodegradability

Progress in Nanocomposites of Polylactic Acid

Improve the thermal and mechanical properties of poly(L-lactide) by forming nanocomposites with pristine vermiculite

Crystallization behavior and mechanical properties of bio-based green composites based on poly(L-lactide) and kenaf fiber

Novel polylactide/vermiculite nanocomposites by in situ intercalative polymerization. I. Preparation, characterization, and properties

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

Performance, crystallization and rheological behavior of poly(lactic acid)/N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride intercalated vermiculite grafted poly(acrylamide) nanocomposites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Effect of Multi-Walled Carbon Nanotubes on the Crystallization and Hydrolytic Degradation of Biodegradable Poly(l-Lactide)

Preparation, Structure, And Performance Of Poly(Lactic Acid)/Vermiculite-Poly(Lactic Acid)-Beta-Cyclodextrin Inclusion Complex Nanocomposites

Nanocomposites of poly(l-lactide) and surface modified magnesia nanoparticles: Fabrication, mechanical property and biodegradability

The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Preparation and properties of new EPDM/vermiculite nanocomposites

Green and scalable narrow-gap exfoliation of high-quality two-dimensional vermiculite nanosheets as poly (vinyl chloride) thermal stabilizers

Poly(lactic Acid)/vermiculite‐ G ‐polyisoprene Nanocomposites Based on Thiol‐ene Click Chemistry: Performance, Shear Crystallization and Rheonaut Technology Analysis

The effect of controlled intercalation on the mechanical performances and dimensional accuracy of material extrusion additive manufactured poly(lactic acid)/organo-montmorillonite nanocomposites

Structure and Properties of Nanosilica Reinforced Biodegradable Polyester Elastomers

Effect of chitin nanocrystals on stereocomplexation of poly( -lactide)/poly( -lactide) blends

Effect of nano-SiO2 on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite