Abstract:Textile Research Journal, Ahead of Print. A fabric touch tester is a novel instrument with fabric handling properties. Its principal advantage is that the device has integrated modules for compression, surface friction, and thermal and bending properties. This module integration simplifies the testing process, and provides an efficient measurement method, and a comprehensive physical index. This study focused on woven fabrics for dress shirts. The fabric samples comprised three groups with various yarn compositions – that is, cotton, polyester, and wool. Sample group 1 was composed of cotton, polyester, and blended yarns; sample group 2 mainly compared the effect of twist yarns on the fabric touch; and sample group 3 was composed of wool and blended yarns with polyester. The handling properties were assessed by compression work and the compression recovery rate for the compression attributes. The results revealed that fabric (T100p1) with high twist-level yarns had a higher value of compression work (242.56 gf*mm2), and the texture type may affect the compression characteristics more significantly than the blending ratio. The fabric touch tester can also distinguish small changes in the compression properties of samples (0.43–0.71), the maximum heat flux and surface roughness amplitude for the thermal and surface roughness properties. The results revealed that the maximum heat flux value of all the samples in this study was 1109 Wm−2, the sample C100 using pure cotton yarn had the highest maximum heat flux value (1270 Wm−2). Moreover, the sample W100 with 100% wool fiber yarn had the highest surface roughness amplitude in the warp direction (81 μm) and surface roughness amplitude in the weft direction (67 μm). Finally, the bending average rigidity was used to assess the bending performance of the fabric samples. These fabric touch tester indicators were applied to analyze the fabric handling characteristics of woven shirting fabrics, and perform cross-analysis among samples.

Measurement of the Free Dynamic Bending Properties of Cotton Woven Fabrics in Air Field and Analysis of Relative Factors

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Numerical Simulation of Whole Process and States of Tensile Membrane Structure

Research on the new method for visualizing bendability testing of fabrics in multiple directions

Study on the Bending Properties of Woven Fabrics and Its Yarns

Arithmetic of Bending Property of the Fabric Based on Its Actual Bending Shape

A New Biaxial Tensile Shear Test Method to Measure Shear Behaviour of Coated Fabrics for Architectural Use

A New Constitutive Model on Biaxial Tensile Behavior of Architectural Fabrics

SHEAR TEST METHOD OF ARCHITECTURAL COATED-FABRICS SUBJECTED TO BIAXIAL TENSILE LOADING

EXPERIMENTAL METHOD FOR BIAXIAL TENSILE STRENGTH OF FABRICS AND PRELIMINARY INVESTIGATIONS

Mechanical Behaviors and Elastic Parameters of Laminated Fabric URETEK3216LV Subjected to Uniaxial and Biaxial Loading

Modeling the flexural rigidity of spunlace nonwoven fabrics

Comparison of Constant-Force Increment and Constant-Rate Loading Protocols in Biaxial Tests of Coated Fabrics

Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites

Fabric handling evaluation of woven shirting fabrics by the fabric touch tester

Draping of plain woven carbon fabrics over a double-curvature mold

Research on the Shear Behavior for Woven Fabrics

An Anisotropic Hyperelastic Constitutive Model for Plain Weave Fabric Considering Biaxial Tension Coupling

Learning-Based Bending Stiffness Parameter Estimation by a Drape Tester

Effects of On-Axis and Off-Axis Tension on Uniaxial Mechanical Properties of Plain Woven Fabrics for Inflated Structures