Abstract:Purpose The current bending test method can only test the bending performance of fabric in one direction at a time. It is not possible to directly observe the bending morphology of fabrics in different directions, and it is necessary to cut samples and repeat the test several times, which takes more time. For this situation, a multidirectional visualization of the fabric bending test method is proposed, using which multiple results can be obtained at one time and the fabric bending can be visualized. Design/methodology/approach About 17 fabrics are tested using a self-designed device. The fabrics are cut into special triangles and multiple sets of results in three directions are obtained at once using the device. The experimental specimens are photographed from the above and the transverse elongation length, bending projection area and circumference are extracted after image processing. Findings The results show that the correlation coefficients of transverse elongation, bending projected area and circumference are good with the bending length measured by the cantilever method. In which, all three indicators are positively correlated with the bending length. This indicates the good feasibility of the new method. Originality/value This method can get the bending index of fabrics in three directions, with five samples in each direction at one time. Meanwhile, it can also visualize the flexural differences between different fabrics and directions of the same fabric. It can provide more efficient testing means for the textile testing field, and the testing efficiency is 15 times of the existing method, which has better theoretical significance and practical values.

Arithmetic of Bending Property of the Fabric Based on Its Actual Bending Shape

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

A Numerical Simulation on Heat Transfer of Fabric Based on the Yarn Interweaved Structure

Measurement of the Free Dynamic Bending Properties of Cotton Woven Fabrics in Air Field and Analysis of Relative Factors

Study on the Bending Properties of Woven Fabrics and Its Yarns

Research on the new method for visualizing bendability testing of fabrics in multiple directions

Simulation of Heat Transfer Through Woven Fabrics Based on the Fabric Geometry Model

Draping of plain woven carbon fabrics over a double-curvature mold

Learning-Based Bending Stiffness Parameter Estimation by a Drape Tester

The Anatomy of Buckling of Textile Fabrics: Drape and Conformability

An Anisotropic Hyperelastic Constitutive Model for Plain Weave Fabric Considering Biaxial Tension Coupling

A Simple Anisotropic Hyperelastic Constitutive Model for Textile Fabrics with Application to Forming Simulation

Mechanical Behaviors and Elastic Parameters of Laminated Fabric URETEK3216LV Subjected to Uniaxial and Biaxial Loading

Modeling the flexural rigidity of spunlace nonwoven fabrics

Shear Behavior of Architectural Coated Fabrics under Biaxial Bias-Extension

Linear Regression of Fabric's Structure Versus Drape Behavior

Exact and approximate mechanisms for pure bending of sheets

Flexible Theoretical Calculation of Loop Length and Area Density of Weft-Knitted Structures: Part I

A New Theoretical Equation to Estimate Poisson’s Ratio for Coated Bi-axial Warp Knitted Fabrics under Bias Tensile Loading

Influence of in-plane bending behaviour on textile composite reinforcement forming