Abstract:Coating technology to modify the property of zirconium (Zr) alloy is a potential method for accident-tolerant fuel claddings. In this work, Cr-coated and CrN-coated are prepared on the surface of Zr alloy by using multi-arc ion plating technology. The effect of coatings on the high-temperature oxidation performance at 800, 1000, and 1200 °C has been investigated. The oxidation behavior, microstructure, and phase composition of the samples were characterized by scanning electron microscopy, atomic force microscope and X-ray diffraction analysis. The mechanical properties of the coatings before and after oxidation were examined by ring compressive and hardness tests. It is shown that all the Cr and CrN coating can effectively protect the substrate from oxidation corrosion in air due to the formation of Cr2O3, which can effectively reduce the penetration of oxygen. The thickness of the oxide layer from the side of the coating doesn't exceed to 5 μm at 1000 °C, and from the uncoated side reaches to 70 μm with pores and rough structure. Bubbles appeared on the surface of the coated samples after oxidizing at 1200°C. These bubbles are located at the Cr and Cr2O3 layers. The high-temperature oxidation resistance of Cr coating at 1200°C is better than that of CrN, the latter appears to crack and spall on the oxide layer. Due to the higher fracture toughness, ductility of the Cr coating and more suitable deformation compatibility, the Cr coating possesses better crack resistance than the CrN coating under mechanical loading.

Effect of Nanometer ZrO_2 Addition on High-temperature Oxidation Resistance of ZnO_2 Ceramics

Effect of Nanometer Y2O3 on Microstructure and High Temperature Oxidation Resistance of ZrO2 Ceramic Coatings

Effect of Nano-meter Si3N4 on Wear Resistance and Corrosion Resistance of ZrO2-Y2O3 Ceramics Coatings

Effect of Nanometer CeO2 on Wearing Resistance and Corrosion Resistance of ZrO2-Y2O3 Ceramics Coatings

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Preparation and properties of nano ZrO2 coating on magnesium alloy

Effect of nitrogen protective atmosphere on microstructure and property of nanocomposite coating

Effect of Nanometer WC Powder on Wear Resistance of Thermal Spraying Coating

The Influence of Zirconium Carbide Addition on Oxidation Behaviour of NiAl Coatings Prepared by Cold Spraying of Ball-Milled Ni–Al Alloy Powder

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Effect of nano-oxides on corrosion resistance of Al2O3–ZrO2–C material

Effect of ZrO2 addition on properties of Al2O3 ceramics

Microstructure and thermal barrier properties study on the plasma deposited ZrO2 nano coating

Effect of Yb2O3 addition on oxidation/ablation behaviors of ZrB2-MoSi2 composite coating under different environment

Research on the Properties of Thermal Sprayed NiCr/Nanostructured (zro2+8%y2o3) Gradated Coating

Effect of Powder Pre-Oxidation on the Microstructure and Ablation Resistance of ZrB2–SiC Coating

The Effect of Nano-Al<sub>2</sub>O<sub>3</sub> on Sintering Behavior and Mechanical Property of ZrO<sub>2</sub> Ceramics

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Effect of temperature-dependent nano SiC on the ablation resistance of ZrC coating

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Influence of High-Enthalpy Atmospheric Plasma Spraying Power on Oxidation Resistance of ZrB2-LaF3 Coatings