Abstract:The Central Solenoid Model Coil (CSMC) project of China Fusion Engineering Test Reactor (CFETR) was developed from 2014 at the Institute of Plasma and Physics Chinese Academy of Sciences (ASIPP) to verify the larger-scale superconducting magnet technology. The short twist pitch (STP) option was chosen for Nb3Sn Cable-In-Conduit Conductors (CICC) due to the stronger rigidity which can withstand the higher electromagnetic (EM) cycles effectively. Performance measurement of conductor short samples in SULTAN facility is the most important assessment method. This paper introduces the Nb3Sn strand parameters and CICC design firstly; then the preparation and measurement procedure of conductor short samples for current sharing temperature (T-cs) are described; subsequently, the T-cs vs. cycles, effective strain (epsilon(eff)) with B x I and transition broadness characteristics compared with strands are assessed qualitatively by power law model. The assessment result shows that the DC performance vs. cycles of the STP design for Nb3Sn CICC is very stable and no degradation. The notable result gives the confidence that life period in the CSMC can be achieved reliably although the number of the EM cycles has been limited to below 10 000 in the measurement. The successful DC performance testing of Nb3Sn CICC will be an important milestone for CSMC project. Lastly, the performance assessment in coil is performed at the typical test waveform. The minimum temperature margin (T-mag) of 0.14 K and electric field of 5 uV/m are achieved respectively. Some slow EM cycles is required to decrease the coupling loss deposition before coil testing.

Conductor Performance of Cccn3, Cccn4, and Cccn5 Samples for Iter Cc Coils

Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils

Performance of ITER Correction Busbar Conductor Samples CBCN2 and CBCN3

Conductor Performance of Nb 3

DC Performance Measurement and Assessment of Nb 3 Sn Cable-In-Conduit Conductor for CFETR CS Model Coil

Status Of The Iter Conductors In China

The performance test and analysis of ITER Main and Correction Busbar conductor

Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample

Manufacturing of Iter Pf5 and Cc Sample Conductors

Stability Analysis on Nb3Sn Sample Conductor of CFETR Central Solenoid Model Coil

The performance test and analysis of the third and fourth China PF conductor for ITER

Manufacturing of Nb3Sn Sample Conductor for CFETR Central Solenoid Model Coil

Research on Mechanical Properties of High-Performance Cable-in-conduit Conductors with Different Design

Performance Test and Analysis of the First Large-Scale Cable-in-conduit Conductor with High Jc Nb3Sn Strand for Fusion Reactor

Preparation of the Manufacture of the ITER Correction Coils

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Mechanical Test on the Iter Cc and Feeder Jacket

Progress of the ITER Correction Coils in China

Mechanical Properties of ITER CICC Jacket in China

Manufacture and Performance Test Result of a 95 Ka-Class Nbti Cable-in-Conduit Conductor for the Low Field Winding-Package of Cfetr-Tf Coil