Abstract:The ITER magnet system uses cable-in-conduit conductor (CICC) technology with individual strands twisted in several stages resulting in a rope-type cable, which is inserted into a stainless steel conduit. The combination of high current (up to 68 kA) and background magnetic field (up to 13 T) results in large transverse Lorentz forces exerted on the conductors during magnet system operation. The high transverse forces, accompanied with the cyclic nature of the load, have a strong influence on the conductor properties. The Twente Cryogenic Cable Press is used to simulate the effect of the Lorentz forces on a conductor comparable to the ITER magnet operating conditions. An overview is presented of the AC coupling and hysteresis loss, mechanical deformation characteristics and inter-strand contact resistance measurement results obtained on full-size ITER CICCs measured in the Twente Cryogenic Cable Press. The aim of this work is to characterize conductors' electromagnetic and mechanical properties during cycling of the load up to 30 000 cycles. The evolution of the magnetization (AC coupling loss time constant nτ), mechanical properties and inter-strand resistance R c between selected strands is presented along with loading history. The R c between first triplet strands is also measured as a function of applied load. It is shown that transverse load cycling has a strong influence on the CICC properties. An overview of the results for eight toroidal field conductors, two central solenoid conductors, three poloidal field conductors of different types (PF1&6, PF4, PF5), one main bus-bar and one correction coil conductor is presented.

The performance test and analysis of ITER Main and Correction Busbar conductor

Performance of ITER Correction Busbar Conductor Samples CBCN2 and CBCN3

Manufacture of ITER feeder sample conductors

Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample

Status and Qualification Test of Feeder Main Busbar Joint for ITER Magnet System

Conductor Performance of Cccn3, Cccn4, and Cccn5 Samples for Iter Cc Coils

Status of the ITER Conductors in China

Manufacture and Behaviors of Superconducting Busbar Joint for ITER Correction Coil Feeder

The performance test and analysis of the third and fourth China PF conductor for ITER

DC Performance Measurement and Assessment of Nb 3 Sn Cable-In-Conduit Conductor for CFETR CS Model Coil

Performance Test and Analysis of the First Large-Scale Cable-in-conduit Conductor with High Jc Nb3Sn Strand for Fusion Reactor

Summary of NbTi Strand Performance for ITER PF Conductors in China

Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Manufacturing of Iter Pf5 and Cc Sample Conductors

Mechanical Test on the Iter Cc and Feeder Jacket

Manufacture and Test of Bi-2212 Cable-In-Conduit Conductor

Manufacture and Performance Test Result of a 95 Ka-Class Nbti Cable-in-Conduit Conductor for the Low Field Winding-Package of Cfetr-Tf Coil

Design and Qualification of Joints for ITER Magnet Busbar System

Overview of verification tests on AC loss, contact resistance and mechanical properties of ITER conductors with transverse loading up to 30 000 cycles