Abstract:The infiltration casting fabrication process based on spherical CaCl2 space-holders and the compressive behavior including the mechanical performance and energy absorption capacity of open-cell aluminum foams were investigated. Open-cell aluminum foams with different porosities in the range of 63.1% to 87.3% can be fabricated by adjusting compression ratios of CaCl2 preforms prepared by precision hot-pressing. The compression tests show that a strain-hardening phenomenon always occurs especially for open-cell aluminum foam with low porosity, resulting in the inclining stress-strain curve in the plateau region. The energy absorption capacity of open-cell aluminum foam decreases with increasing porosity when compared at the same strain. However, when compared at a given stress, each foam can absorb the maximal energy among the five foams in a special stress range. Additionally, open-cell aluminum foam possesses the maximum energy absorption efficiency at its optimum operating stress. At this stress condition, the foam can absorb the highest energy compared with other foams at the same stress point. The optimum operating stress and the corresponding maximal energy absorption decrease with increasing the porosity. The optimum operating stress for energy absorption can also be determined similarly when taking into consideration of the lightweight extent of foams.

Fabricating of Open-Cell Porous Al-Si Alloy with Pressure Penetration Casting

Study of fabricating technology of a porous aluminum alloy

Fabrication of Porous Aluminum with Controllable Open-Pore Fraction

Study on the Fabrication of Porous TiAl Alloy Via Non-Aqueous Gel Casting of a TiH2 and Al Powder Mixture

Fabrication and Properties of Micron Cell Porous Al

Pore Architectures and Mechanical Properties of Porous α-SiAlON Ceramics Fabricated via Unidirectional Freeze Casting Based on Camphene-Templating

Pore Structure and Compression Behavior of Porous TiAl Alloys by Freeze Casting

FABRICATION OF ALUMINUM-SALT COMPOSITE AND ITS THERMAL EXPANSION PROPERTY

Controlled Fabrication of Porous Al2O3 Ceramic by N,N′-dimethylformamide-based Gel-Casting

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Fabrication of Co-Continuous SiC/Al Composites from Novel SiC Preforms with High Porosity and Controllable Pore Size

Pore Architectures And Mechanical Properties Of Porous -Sialon Ceramics Fabricated Via Unidirectional Freeze Casting Based On Camphene-Templating

Fabrication of Porous Alumina Ceramics with Directional Pore Channels Structure by Freeze-Gel Casting Processing

Microstructures and Properties of Porous TiAl-based Intermetallics Prepared by Freeze-Casting

Uncovering the effects of local pressure and cooling rates on porosity formation in AA2060 Al-Li Alloy

Fabrication of Al2O3/6061 Particles Composite Materials by Pulse Squeeze Exhaust Casting.

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Pore Structure and Compressive Properties of Open-Cell Aluminum Foams Prepared by Infiltration Casting Based on NaCl Space-Holder

Preparation and Compression Behavior of High Porosity, Microporous Open-Cell Al Foam Using Supergravity Infiltration Method

Porous α-Al2O3 ceramics prepared by gelcasting

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders