Abstract:Open-celled porous（Ti B 2 –Al 2 O 3 ）/Ni Al composites were successfully fabricated by using spherical carbamide as space holders via self-propagating high-temperature synthesis（SHS）.Effects of 10Al–3B 2 O 3 –3Ti O 2 contents（0–20 wt%）on the pore structures and the quasi-static compressive behaviors of the resultant materials were investigated.The porous（Ti B 2 –Al 2 O 3 ）/Ni Al composites exhibit composite pore structure consisting of homogeneously distributed and interconnected millimeter pores and micropores.The millimeter pores virtually inherit the shape and size of carbamide particles,while the pore size of micropores increases with increasing the 10Al–3B 2 O 3 –3Ti O 2 content.Depending on the volume fraction of the carbamide,the porosity of the porous materials can be easily controlled in a range of 55%–85%.When the porosity is about 72%,the compressive strengths of porous Ni Al and porous（Ti B 2 –Al 2 O 3 ）/Ni Al composite with 15% 10Al–3B 2 O 3 –3Ti O 2 in green compact are 19 and 32 MPa,and the corresponding strains are 2.9%and 5.7%,respectively.Furthermore,the quasi-static compressive behavior of porous（Ti B 2 –Al 2 O 3 ）/Ni Al composites can be estimated by Gibson–Ashby model.

Pore Structure and Compression Behavior of Porous TiAl Alloys by Freeze Casting

Lamellar Structure/processing Relationships and Compressive Properties of Porous Ti6Al4V Alloys Fabricated by Freeze Casting.

Microstructures and Properties of Porous TiAl-based Intermetallics Prepared by Freeze-Casting

Porous NiCu alloy with tailored pore structure and mechanical property fabricated by freezing casting

Study on the Fabrication of Porous TiAl Alloy Via Non-Aqueous Gel Casting of a TiH2 and Al Powder Mixture

Mechanical Properties of Porous Ti-6Al-4V Titanium Alloys Fabricated by Selective Laser Melting

Preparation and characteristics of Ti-Al based alloy porous material

Effect of Pressing Pressure on Pore Structure and Filtering Performance in Porous TiAl Alloy

Alumina Porous Ceramics Obtained by Freeze Casting: Structure and Mechanical Behaviour under Compression

Pore Architectures and Mechanical Properties of Porous α-SiAlON Ceramics Fabricated via Unidirectional Freeze Casting Based on Camphene-Templating

Preparation And Properties Of Porous Ti-Al Alloys By Reactive Infiltration

Porous TiAl alloys fabricated by sintering of TiH 2 and Al powder mixtures

Effects of the Al Content on Pore Structures of Porous Ti–Al Alloys

Microstructure and mechanical properties of directionally ordered porous Ti3SiC2 prepared using freeze casting

Fabrication and Characterization of Robust Freeze-Cast Alumina Scaffolds with Dense Ceramic Walls and Controllable Pore Sizes

Fabrication,Pore Structures and Mechanical Properties of （tib 2 –al 2 O 3 ）/nial Porous Composites

Pore Architectures And Mechanical Properties Of Porous -Sialon Ceramics Fabricated Via Unidirectional Freeze Casting Based On Camphene-Templating

Fabrication and compressive properties of directional porous titanium scaffold by freeze casting TiH2 powders

The Research of Compression and Energy Absorption Property of Ti6Al4V Porous Structure Based on Selective Laser Melting

Correlation Between Permeation Performance and Structural Evolution of Al-doped Lamellar Porous Ti3SiC2 Through Freeze Casting

Pore Structures and Mechanical Properties of Porous Titanium Scaffolds by Bidirectional Freeze Casting.