Abstract:Oxidative stability of radiation crosslinked ultrahigh molecular weight polyethylene (UHMWPE) artificial joints is significantly improved by vitamin E (VE), but there is a dilemma that VE hinders crosslinking and thus jeopardizes the wear of UHMWPE. In this effort, we proposed an efficient strategy to stabilize UHMWPE under limited antioxidant contents, where VE and D-sorbitol (DS) were used as the primary antioxidant and the secondary antioxidant respectively. For non-irradiated blends with fixed antioxidant contents, oxidative stability accessed by oxidation induction time (OIT) of VE/DS/UHMWPE blends was superior to that of VE/UHMWPE blends, while DS/UHMWPE blends showed no increase in OIT. The cooperation between DS and VE exhibited a synergistic effect on enhancing the oxidative stability of UHMWPE. Interestingly, the irradiated VE/DS/UHMWPE blends showed comparable OIT but a significantly higher crosslink density than the irradiated VE/UHMWPE blends. The crystallinity, melting point, and in vitro biocompatibility of the blends were not affected by VE and DS. The quantitative relationships of mechanical properties, oxidation stability, crystallinity and crosslink density were established to unveil the correlation of these key factors. The overall properties of VE/UHMWPE and VE/DS/UHMWPE blends were compared to elucidate the superiority of the antioxidant compounding strategy. These findings provide a paradigm to break the trade-off between oxidative stability, crosslink density and mechanical properties, which is constructive to develop UHMWPE bearings with upgraded performance for total joint replacements.Statement of SignificanceVE-stabilized UHMWPE is the most commonly used material in total joint replacements at present. However, oxidation and wear resistance of VE/UHMWPE implants cannot be unified since VE reduces the efficiency of radiation crosslinking. It limits the use of VE. Herein, we proposed a compounding stabilization by the synergy between VE and DS. The antioxidation capability of VE was revived by DS, thus enhancing the oxidation stability of unirradiated UHMWPE. The irradiated VE/DS/UHMWPE exhibited similar oxidation stability but higher crosslink density than irradiated VE/UHMWPE, which is beneficial to combat wear of UHMWPE and to inhibit the occurrence of osteolysis. This synergistic antioxidation strategy endows the UHMWPE joint material with good overall performance, which is of clinical significance.

ON THE PHYSICAL AND STRUCTURAL EFFECTS OF VITAMIN-E BLENDING IN HIGHLY CROSS-LINKED POLYETHYLENE FOR TOTAL HIP ARTHROPLASTY

Effects of vitamin E blending on plastic deformation mechanisms of highly crosslinked ultrahigh molecular weight polyethylene (HXL-UHMWPE) in total hip arthroplasty.

Vitamin-E blended and infused highly cross-linked polyethylene for total hip arthroplasty: a comparison of three-dimensional crystalline morphology and strain recovery behavior.

Strain-induced Microstructural Rearrangement in Ultra-High Molecular Weight Polyethylene for Hip Joints: A Comparison Between Conventional and Vitamin E-infused Highly-Crosslinked Liners.

813 the Performances of Vitamin E (D, L-α-Tocopherol) Added Ultra High Molecular Weight Polyethylene for Artificial Knee Components

A comparative microstructural study of vitamin-E blended and infused highly crosslinked UHMWPE for total knee arthroplasty.

To what extent could the acetabular liner thickness be reduced yet remaining tribologically acceptable in metal‐on‐vitamin E‐diffused crosslinked polyethylene hip arthroplasty?

Effect of Surface Crosslinking on the Wear and Friction Behavior of Tea Polyphenol Stabilized Ultra-High Molecular Weight Polyethylene for Total Joint Replacements

Minimum 10-Y Follow-Up of Vitamin-E-Diffused Highly Crosslinked Polyethylene Liners in Total Hip Arthroplasty: A Comparative Evaluation From a Prospective, International, Multicenter Cohort Study

Vitamin E-Enhanced Liners in Primary Total Hip Arthroplasty: A Systematic Review and Meta-Analysis

Highly Cross-Linked Polyethylene in Total Hip and Knee Replacement: Spatial Distribution of Molecular Orientation and Shape Recovery Behavior

Vitamin E-enriched medium cross-linked polyethylene in total knee arthroplasty (VIKEP): clinical outcome, oxidation profile, and wear analysis in comparison to standard polyethylene—study protocol for a randomized controlled trial

The Use of Large Metal Heads in Thin Vitamin E-Doped Cross-Linked Polyethylene Inserts Does Not Increase Polyethylene Wear in Total Hip Arthroplasty: Five-Year Results From a Randomized Controlled Trial

Vitamin E-stabilized polyethylene shows similar survival rates at minimum 7-year follow-up compared to conventional polyethylene in primary total knee arthroplasty

Synergy between vitamin E and D-sorbitol in enhancing oxidation stability of highly crosslinked ultrahigh molecular weight polyethylene

Effect of surface crosslinking on the Friction behavior of Tea Polyphenol stabilized Ultra-high molecular weight polyethylene

Ten-year clinical and radiological outcomes with a vitamin E-infused highly cross-linked polyethylene acetabular cup

1227 the Effect of Vitamin E (D, L-α-Tocopherol) Addition on Microscopic Mechanical Behavior of Ultra High Molecular Weight Polyethylene

Strain-Induced Crystallization and Orientation of Vitamin E-Blended Ultrahigh Molecular Weight Polyethylene

Enhanced Oxidation Stability of Highly Cross-Linked Ultrahigh Molecular Weight Polyethylene by Tea Polyphenols for Total Joint Implants.

INFLUENCE OF OXIDE VERSUS NON-OXIDE FEMORAL HEADS ON THE OXIDATION OF POLYETHYLENE ACETABULAR LINERS