Abstract:Electrochemical reactions occur at the electrode/electrolyte interface. In lithium-ion batteries, the reversible Li ion insertion/desertion from the interfaces of electrodes gives the capacity of the battery. The surface phase transition and component chemical states change during the lithiation/delithiation in turn hugely effect the further battery capacity and reversibility. In the past decades, many ex-situ characterizations gave some insights of electrode surface behavior after cycling. However, the surface chemistry of electrode relies decisively on the real battery operation condition, e.g. the passive layer formed on the electrode surface changes dramatically with the absence of electrolyte. Therefore it is emerging and necessary to develop operando study for electrode/electrolyte interface probing during battery cycling. X-ray photoelectron spectroscopy (XPS) as a surface sensitive technique detects the photoelectrons ejected from core level with certain pass energy. The binding energy of the electrons give the information of chemical composition and chemical states of the materials. Ambient pressure XPS, developed rapidly in recent years after since it gives possibility of the participation of gas and/ liquid phase, enabling the observation of structure dynamics during chemical reactions, thereby unprecedentedly extended the application of the technique. A method called dip-and-pull is used for operando liquid/solid interface probing. With a typical three-electrode system, the electrode is pulled up from the electrolyte with still contact to liquid to maintain the circuit. A thin film of electrolyte formed with a shape of meniscus at the interface of electrode, electrolyte and atmosphere is probed through. The probing of the electrochemical active surface through the liquid can be achieved with an optimized liquid layer and surface condition. In this study Lithium cobalt oxide (LCO), as the most widely used positive electrode for Li-ion battery with rock salt layered structure optimized for reversible Li intercalation/deintercalation, is used for interface dynamics investigation. As Li is deintercalated from LCO structure, the charge transfer from Li + to Co-O environment causes a phase change. It was commonly assumed that the charge due to the deintercalation of Li from structure is fully transferred to Co 3+ , i.e. the loss of one electron contributes to one Co 4+ from Co 3+ oxidation. However, it is recently reported that the real condition maybe more complicated. The charge transfer from Li + to O a- (a<2) might take place especially during high voltage due to the hybrid fermi level of O and Co which might increase the mobility of O a- and further results in cobalt reduction and oxygen evolution reaction. But the mechanism of structure evolution under corresponding potentials are very unclear. In this study, with the operando probing with APXPS, it is discovered that a native phase of Co 2+ may play an unignorable role in the charge transfer, giving some new understandings of phase transition during lithiation/delithiation (see figure 1). With the development of APXPS for battery probing, combining with software data treatment, a clearer picture of phase evolution is possible to be given by time-resolved probing with APXPS. Potentially hidden intermediate states during electrochemical reactions which cannot be given from ex-situ probing are resolved. Figure 1

Operando Investigation into Dynamic Evolution of Cathode-Electrolyte Interfaces in a Li-Ion Battery

Dynamic evolution of Cathode−Electrolyte interface of LiNi0.6Co0.2Mn0.2O2 during the initial Charge−Discharge process

Recent advance into understanding electro-chemo-mechanical behavior of lithium ion batteries by electron microscopy

Electron Energy Levels Determining Cathode Electrolyte Interphase Formation

Understanding the cathode electrolyte interface formation in aqueous electrolyte by scanning electrochemical microscopy

In Situ SEM Observation of Structured Si/C Anodes Reactions in an Ionic-Liquid-Based Lithium-Ion Battery

Probing the Formation of Cathode-Electrolyte Interphase on Lithium Iron Phosphate Cathodes via Operando Mechanical Measurements

Surface Changes of LiNixMnyCo1–x–yO2 in Li-Ion Batteries Using in Situ Surface-Enhanced Raman Spectroscopy

In Situ Characterizations of the Dynamics of Cathode Electrolyte Interfaces at Different Current Densities

Promoting Interfacial Reaction via Quantifying NMC811 CEI Evolution and Li+ Desolvation Using Single‐Particle Electrochemical Methods

Operando Ambient Pressure X Ray Photoelectron Spectroscopy for Li-Ion Battery Electrode/Electrolyte Interface Probing

Operando Electrochemical Liquid Cell STEM Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries

Resolving nanostructure and chemistry of solid-electrolyte interphase on lithium anodes by depth-sensitive plasmon-enhanced Raman spectroscopy

Investigation of the Cathode–Catalyst–Electrolyte Interface in Aprotic Li–O2 Batteries

In Situ Measurements of the Mechanical Properties of Electrochemically Deposited Li2CO3 and Li2O Nanorods.

In Situ Observation of Interface Evolution on a Graphite Anode by Scanning Electrochemical Microscopy

Operando probing of Li-insertion into LiMn$_2$O$_4$ cathodes by spectroscopic ellipsometry

Operando X-ray Absorption Spectroscopy Reveals Solid Electrolyte Interphase Formation on Silicon Anodes for Li-ion Batteries

Nanoscale imaging of fundamental li battery chemistry: solid-electrolyte interphase formation and preferential growth of lithium metal nanoclusters

Computational Exploration of the Li-Electrode|Electrolyte Interface in the Presence of a Nanometer Thick Solid-Electrolyte Interphase Layer