Abstract:This article delves into the mechanical reshaping process of laser shock‐clinched joints, aiming to improve their appearance and mechanical properties. The study includes a thorough analysis and comparison of clinched and reshaped joints. The findings indicate that reshaping results in a reduction in protrusion height, an increase in interlock, and an improvement in mechanical strength. This study investigates the viability of employing a mechanical reshaping method to reduce the protrusion height of laser shock‐clinched joints while improving their strength. The method involves utilizing a pair of flat reshaping dies to compress the protrusion on laser shock‐clinched joints made of copper foils and stainless steel sheets. Through numerical simulations and experiments, the study delves into the processes of laser shock clinching, mechanical reshaping, and failure modes of joints. Examination of the cross‐sectional profiles of both clinched and reshaped joints provides insights into the influence of process parameters during mechanical reshaping. Furthermore, tensile‐shear and cross‐tension tests are conducted to ascertain the mechanical properties of joints. The results show that the mechanical reshaping process not only effectively reduces the protrusion height of laser shock‐clinched joints but also significantly enhances their strength due to augmented interlock. Specifically, compressing the joint with an initial protrusion height of 0.20 mm down to 0.08 mm results in an increase in interlock from 27.65 to 62.00 μm, along with a 35.11% increase in tensile‐shear strength and a 122.17% increase in cross‐tension strength. The primary failure modes observed are neck fracture and pulling out.

Numerical and Experimental Investigations of the Two-Step Clinching Process with a Bumped Die

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Mechanical Properties of the Two-Steps Clinched Joint with a Clinch-Rivet

Experimental investigation of the novel dieless clinching process free of blank holder

Optimization of Geometrical Design of Clinching Tools in Clinching Process with Extensible Dies

Comparative Investigation of Auxiliary Processes for Increasing the Strength of Clinched Joints

Numerical and experimental investigations of the reshaped joints with and without a rivet

Investigation of mechanical behavior of the reshaped joints realized with different reshaping forces

Experimental Investigation On The Joining Of Aluminum Alloy Sheets Using Improved Clinching Process

Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses

Experimental Research on the Compressed Joints with Different Geometrical Parameters

Numerical and Experimental Study of the Mechanical Reshaping Process for Laser Shock Clinching

Mechanical characterization of a steel-aluminum clinched joint under impact loading

Investigation on Mechanical Behavior of Clinched Joint Using Extensible and Flat Die Techniques

Investigation of a renovating process for failure clinched joint to join thin-walled structures

Comparative Study on Two Compressing Methods of Clinched Joints with Dissimilar Aluminum Alloy Sheets

Joining thin-walled structures without protuberance by two-strokes flattening clinching process

Optimization of a Reshaping Rivet to Reduce the Protrusion Height and Increase the Strength of Clinched Joints

Numerical investigation of tool parameter influence on the interlock forming during flat clinching process

Forming Process and Morphology Control of Mechanical Clinch Joint of Steel/Aluminum Sheet

Experimental Study on the Height-Reduced Joints to Increase the Cross-Tensile Strength