Abstract:Ti2AlNb (Ti-22Al-25Nb at.%, nominal composition) intermetallic is essential to aerospace industry from a weight reduction perspective, and brings a possibility of replacing some Ni-based superalloys. Despite evaporation of element Al (from its original composition 22.8 at.% to 18.5 at.%), selective laser melting (SLM) technology offers distinct advantages in fabricating Ti2AlNb intermetallic with superior room-temperature properties. A full understanding of corresponding heat treatment mechanism is the key to utilize well the SLM-prepared Ti2AlNb at high temperatures. This study aims to clarify the relationship between the microstructure and mechanical propensities of SLM-prepared then heat-treated Ti2AlNb, to ultimately achieve promising mechanical performances at high temperatures. For this research purpose, a series of heat treatments were conducted, and the corresponding microstructures, mechanical properties were systematic studied by advanced characterization techniques. Results show that the mechanical properties at both room and high temperatures depend on heat treatment adopted. The samples solution-treated at 950 degrees C and then aged at 700 degrees C show promising room and high temperature strengths due to the formation of acicular O, alpha(2) and grain boundary alpha(2) phases. However, their ductility was poor. Aging at 830 degrees C reduces the strength, but significantly improves the ductility due to the appearance of rodlike O phase and the increase of B2/beta phase proportion. The alloy possesses promising strength and ductility (611 MPa, 10.0%) and high thermal stability at 650 degrees C. It is further demonstrated that the heat-treated Ti2AlNb possesses promising specific strength, even higher than that of as-cast Inconel 718 superalloy. The developed alloy, therefore, has a high potential for the industries requiring high-temperature performance and weight reduction.

Microstructure and Mechanical Performance Tailoring of Ti-13Nb-13Zr Alloy Fabricated by Selective Laser Melting after Post Heat Treatment

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Microstructure and Mechanical Property of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy Fabricated by Selective Laser Melting with a Preheated Substrate

Microstructure Evolution and High Strength-Ductility Synergy of Ti-13Nb-13Zr-2Ta Alloy Fabricated by Laser Powder Bed Fusion

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Tailoring the microstructure and mechanical property of laser powder bed fusion fabricated Ti–6Al–2Sn–4Zr–2Mo via heat treatment

Effect of Subtransus Heat Treatment on the Microstructure and Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloy

Microstructure and mechanical properties evolution of Ti-13Nb-13Zr alloy processed by ECAP-Conform and rotary swaging

Microstructure, heat treatment and mechanical properties of TiB2/Al–7Si–Cu–Mg alloy fabricated by selective laser melting

Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement

Influence of Post Heat Treatment on Microstructure and Mechanical Property of Ti6Al4V Parts Produced by Selective Laser Melting

Grain refinement and improved tensile properties of Ti5Al2Sn2Zr4Mo4Cr titanium alloy fabricated by laser solid forming

High-strength and thermally stable TiB2-modified Al–Mn–Mg–Er–Zr alloy fabricated via selective laser melting

Tensile Behavior of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-Built Surface Quality

Microstructural evolution and mechanical properties of Ti55531–0.5Nb fabricated by selective laser melting under different heat treatments

Effect of Heat Treatments on the Microstructure and Mechanical Properties of Ti2AlNb Intermetallic Fabricated by Selective Laser Melting

Selective Laser Melting Enabled Additive Manufacturing of Ti-22Al-25Nb Intermetallic: Excellent Combination of Strength and Ductility, and Unique Microstructural Features Associated

Selective Laser Melting of Ti–22Al–25Nb Intermetallic: Significant Effects of Hatch Distance on Microstructural Features and Mechanical Properties

Effects of Defects and Microstructures on Tensile Properties of Selective Laser Melted Ti6Al4V Alloys Fabricated in the Optimal Process Zone

Tailoring microstructure with special bimodal structure to improve the ductility and fatigue life of laser powder bed fused Ti6Al4V alloy