Abstract:Molybdenum nitrides and oxynitrides have been increasingly realized as (electro)catalysts for a variety of reactions. In this context, the cubic "γ-Mo2N", also known to contain oxygen in the bulk, is of particular interest. The γ phase is typically derived from ammonolysis of MoO3, and a high temperature is needed to fully react the stable MoO2 intermediate that often forms along the reaction pathway. In this study, ammonolysis of atypical bronze (HxMoO3) and peroxo (H2MoO5) precursors was undertaken to avoid the formation of this undesired intermediate with the aim of synthesizing "γ-Mo2N" at reduced temperatures and thus with a high surface area. It was found, using in situ powder diffraction, that, when the phase I bronze (x ≈ 0.3) served as the precursor, MoO2 formed as an intermediate and was retained in the reaction product until 700 °C. In contrast, ammonolysis of the phase III bronze (x ≈ 1.7) and of H2MoO5 circumvented the MoO2 intermediate. From these latter two precursors, "γ-Mo2N" was formed at the lowest maximum reaction temperatures reported in the literature, namely, 480 °C in the case of HxMoO3-III and 380 °C for H2MoO5. The resulting products displayed extremely high surface areas of 206 and 152 m2/g, respectively, presumably as a consequence of the low synthesis temperatures. While the HxMoO3-III precursor showed evidence of a topotactic transformation pathway, with morphological similarity between precursor and product phases, H2MoO5 transformed via amorphization. Electrochemical characterization showed moderate activity for the hydrogen evolution reaction (HER), which increased after exposure to reducing potentials and loosely scaled with the catalyst-specific surface area. This work points toward new low-temperature synthesis pathways for accessing molybdenum (oxy)nitrides with high surface areas.

Preparation of Industrial Grade MoO2 by the Reaction Between Industrial Grade MoO3 and Activated Carbon

Preparation of Ultrafine Β-Moo3 from Industrial Grade MoO3 Powder by the Method of Sublimation

Study of the Interactions Between MoO3and Α-Fe2o3

Preparation of MoO 3 powder by hydrothermal method

Experimental Study on Preparation of Calcium Oxide by Coal Reduction of Calcium Sulfate in Carbon Dioxide Atmosphere

A novel method for preparing ultrafine molybdenum powder

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Preparation of Molybdenum Carbides Using Butane and Their Catalytic Performance

Surface Interactions of MoO3/ Α-Fe2o3 System

Short-flow preparation of pure MoO3 from CaCO3-added molybdenite concentrate pellet by sublimation with flue gas recirculation

Modulating the C and Mo Exposure of Molybdenum Carbide for Efficient Low-Temperature CO2 Reduction to CO

Hydrogenation of CO2 on MoO3/Al2O3 and γ-Al2O3

Surface Interactions of MoO_3/a-Fe_2O_3 System

Mechanism and kinetics of decomposition reaction of ultrafine ammonium molybdate for preparing ultrafine MoO 3 powder

Fabrication of molybdenum carbide catalysts over multi-walled carbon nanotubes by carbothermal hydrogen reduction

Synthesis of TiO(2) Supported on Activated Carbon by MOCVD: Operation Parameters Study.

High and Stable Catalytic Activity of Ag/Fe 2 O 3 Catalysts Derived from MOFs for CO Oxidation

Effect of preparation condition on performance of Ag–MoO3/ZrO2 catalyst for direct epoxidation of propylene by molecular oxygen

Reactivity Of Lattice Oxygen In Supported Moo3/Gamma-Al2o3 Catalysts For Oxidative Dehydrogenation Of Propane

Molybdenum Oxide Precursors that Promote the Low-Temperature Formation of High-Surface-Area Cubic Molybdenum (Oxy)nitride

Construction of Mo-MOF-derived molybdenum dioxide on carbon nanotubes with tunable nitrogen content and particle size for oxidative desulfurization