Abstract:Due to significant enhancement in heat removal capacity of recirculating gas and space-time yield of fluidized bed reactors, condensed mode operation has become most popular in gas-phase ethylene polymerization. A mathematical model for condensing mode operation of gas phase ethylene polymerization process was established, which included fluidized-bed reactor model, stage heat exchanger model, and control model of reactor temperature, pressure, and component partial pressure of recirculating gas. Process simulation was applied to obtain steady state solution when reactor temperature was controlled by close-loop, and dynamic behavior of the system under small perturbation was used to qualitatively analyze stability of ethylene polymerization when reactor temperature was controlled by open-loop and close-loop. Finally, stepwise response characteristics of ethylene polymerization close-loop system was studied under consideration of 1-hexene partial pressure and catalyst feed rate. Simulation results show that the steady state solutions are stable within the scope of studied conditions when reactor temperature is close-loop controlled, whereas the steady state solutions are divided into stable and unstable zone by bifurcation points when reactor temperature is open-loop controlled. The long and short period oscillations observed in stepwise response of reactor temperature to 1-hexene partial pressure reveal that ethylene polymerization system under condensed mode operation is a complex process with multiple coupling control loops.

Computational Fluid Dynamics Simulation of Gas–liquid–solid Polyethylene Fluidized Bed Reactors Incorporating with a Dynamic Polymerization Kinetic Model

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

CFD Modeling of Styrene Polymerization in a CSTR

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

Numerical Simulation of the Gas−Solid Flow in Fluidized-Bed Polymerization Reactors

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

A Computational Fluid Dynamics Model Coupled with Ethylene Polymerization Kinetics for Fluidized Bed Polyethylene Reactor

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Three‐dimensional CFD‐PBM Coupled Model of the Temperature Fields in Fluidized‐bed Polymerization Reactors

A Fundamental CFD Study of the Gas–solid Flow Field in Fluidized Bed Polymerization Reactors

A CFD‐PBM‐PMLM Integrated Model for the Gas–solid Flow Fields in Fluidized Bed Polymerization Reactors

Modeling and Simulation of Particle Size Distribution Behavior in Gas–liquid–solid Polyethylene Fluidized Bed Reactors

Important Analysis of Liquid Vaporization Modeling Scheme in Computational Fluid Dynamics Modeling of Gas–Liquid–Solid Polyethylene Fluidized Bed Reactors

Numerical Simulation of Liquid–solid Two-Phase Flow in a Tubular Loop Polymerization Reactor

CFD Prediction of Scale-Up Effect on the Hydrodynamic Behaviors of a Pilot-Plant Fluidized Bed Reactor and Preliminary Exploration of Its Application for Non-Pelletizing Polyethylene Process

Computational Fluid Dynamics Simulation of Multiscale Mixing in Anionic Polymerization Tubular Reactors