Abstract:Although the use of computational fluid dynamics (CFD) model coupled with population balance (CFD-PBM) is becoming a common approach for simulating gassolid flows in polydisperse fluidized bed polymerization reactors, a number of issues still remain. One major issue is the absence of modeling the growth of a single polymeric particle. In this work a polymeric multilayer model (PMLM) was applied to describe the growth of a single particle under the intraparticle transfer limitations. The PMLM was solved together with a PBM (i.e. PBM-PMLM) to predict the dynamic evolution of particle size distribution (PSD). In addition, a CFD model based on the Eulerian-Eulerian two-fluid model, coupled with PBM-PMLM (CFD-PBM-PMLM), has been implemented to describe the gassolid flow field in fluidized bed polymerization reactors. The CFD-PBM-PMLM model has been validated by comparing simulation results with some classical experimental data. Five cases including fluid dynamics coupled purely continuous PSD, pure particle growth, pure particle aggregation, pure particle breakage, and flow dynamics coupled with all the above factors were carried out to examine the model. The results showed that the CFD-PBM-PMLM model describes well the behavior of the gassolid flow fields in polydisperse fluidized bed polymerization reactors. The results also showed that the intraparticle mass transfer limitation is an important factor in affecting the reactor flow fields. (C) 2011 American Institute of Chemical Engineers AIChE J, 58: 17171732, 2012

A CFD‐PBM‐PMLM Integrated Model for the Gas–solid Flow Fields in Fluidized Bed Polymerization Reactors

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

A CFD-PBM Coupled Model with Polymerization Kinetics for Multizone Circulating Polymerization Reactors

Coupling of CFD with PBM for a pilot-plant tubular loop polymerization reactor

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Three‐dimensional CFD‐PBM Coupled Model of the Temperature Fields in Fluidized‐bed Polymerization Reactors

A CFD-PBM Model Considering Ethylene Polymerization for the Flow Behaviors and Particle Size Distribution of Polyethylene in a Pilot-Plant Fluidized Bed Reactor

Particle Behavior in FBRs: A Comparison of the PBM-CFD, Multi-Scale CFD Simulation of Gas-Solid Catalytic Propylene Polymerization: Particle Behavior in FBRs: A Comparison of the PBM-CFD …

A Fundamental CFD Study of the Gas–solid Flow Field in Fluidized Bed Polymerization Reactors

Computational Fluid Dynamics Simulation of Gas–liquid–solid Polyethylene Fluidized Bed Reactors Incorporating with a Dynamic Polymerization Kinetic Model

Numerical Simulation of the Gas−Solid Flow in Fluidized-Bed Polymerization Reactors

3D CFD-PBM Modeling of the Gas–solid Flow Field in a Polydisperse Polymerization FBR: the Effect of Drag Model

Modeling and Simulation of Particle Size Distribution Behavior in Gas–liquid–solid Polyethylene Fluidized Bed Reactors

Cfd-Pbm Modeling Polydisperse Polymerization Fbrs with Simultaneous Particle Growth and Aggregation: the Effect of the Method of Moments

A Multiscale CFD-PBM Coupled Model for the Kinetics and Liquid–liquid Dispersion Behavior in a Suspension Polymerization Stirred Tank

A CFD-PBM coupled model for gas-liquid flows

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

Coupled Single‐Particle and Population Balance Modeling for Particle Size Distribution of Poly(propylene) Produced in Loop Reactors

Multiscale Computational Fluid Dynamics–Population Balance Model Coupled System of Atom Transfer Radical Suspension Polymerization in Stirred Tank Reactors