Abstract:Accurately characterizing the internal porosity rate of thermal barrier coatings (TBCs) was essential for prolonging their service life. This work concentrated on atmospheric plasma spray (APS)-prepared TBCs and proposed the utilization of terahertz non-destructive detection technology to evaluate their internal porosity rate. The internal porosity rates were ascertained through a metallographic analysis and scanning electron microscopy (SEM), followed by the reconstruction of the TBC model using a four-parameter method. Terahertz time-domain simulation data corresponding to various porosity rates were generated employing the time-domain finite difference method. In simulating actual test signals, white noise with a signal-to-noise ratio of 10 dB was introduced, and various wavelet transforms were utilized for denoising purposes. The effectiveness of different signal processing techniques in mitigating noise was compared to extract key features associated with porosity. To address dimensionality challenges and further enhance model performance, kernel principal component analysis (kPCA) was employed for data processing. To tackle issues related to limited sample sizes, this work proposed to use the Siamese neural network (SNN) and generative adversarial network (GAN) algorithms to solve this challenge in order to improve the generalization ability and detection accuracy of the model. The efficacy of the constructed model was assessed using multiple evaluation metrics; the results indicate that the novel hybrid WT-kPCA-GAN model achieves a prediction accuracy exceeding 0.9 while demonstrating lower error rates and superior predictive performance overall. Ultimately, this work presented an innovative, convenient, non-destructive online approach that was safe and highly precise for measuring the porosity rate of TBCs, particularly in scenarios involving small sample sizes facilitating assessments regarding their service life.

The Evolution of Pores in Thermal Barrier Coatings under Volcanic Ash Corrosion Using X-ray Computed Tomography

Effect of Pore Evolution on Thermal Diffusivity and Radiation Characteristics of Thermal Barrier Coatings after High-Temperature Exposures

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Experimental Study of High Temperature Failure Behavior of Thermal Barrier Coating Based on 3D Digital Image Correlation of Single camera

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

A real time deformation evaluation method for surface and interface of thermal barrier coatings during 1100°C thermal shock

Failure Mechanism of EB-PVD Thermal Barrier Coatings under the Synergistic Effect of Thermal Shock and CMAS Corrosion

Failure behavior study of EB-PVD TBCs under CMAS Corrosion and Thermal Shock Cycles

The Microstructural Investigation of Vermiculite-Infiltrated Electron Beam Physical Vapor Deposition Thermal Barrier Coatings

Failure Characteristics and Life Prediction for Thermally Cycled Thermal Barrier Coatings

Terahertz Non-Destructive Testing of Porosity in Multi-Layer Thermal Barrier Coatings Based on Small-Sample Data

Characterization of isothermal and cyclic thermal damage of EB-PVD TBCs with the help of the 3D-DIC technique

Effect of Heat Treatment at 900 °C on Microstructural and Mechanical Properties of Thermal Barrier Coatings

Evaluation and Characterization of a Durable Composite Phase Thermal Barrier Coating in Solid Particle Erosion and Burner Rig Tests

4D Imaging of Mineral Dissolution in Porous Carbonado Diamond: Implications for Acid Digestion and XCT Measurement of Porosity and Material Properties

Microstructure characteristics and deformation-induced crystalline-to-amorphous phase transformation in thermal barrier coatings during thermal cycling

Measurement of the Elastic Modulus and Residual Stress of Thermal Barrier Coatings Using a Digital Image Correlation Technique

Chemo-thermo-mechanical modeling of EB-PVD TBC failure subjected to isothermal and cyclic thermal exposures

RESEARCH PROGRESS ON THE EXPERIMENTAL MEASUREMENT METHODS OF MECHANICAL PROPERTIES OF THERMAL BARRIER COATINGS

Thermal shock behaviors and failure mechanisms of EB-PVD thermal barrier coatings using radiant heating

THz-TDS characterization of stress evolution of EB-PVD TBCs under thermal cycling