Abstract:With the development of aerospace and fusion engineering, understanding the mechanical behavior of materials under high-temperature conditions has become increasingly important. However, few studies are devoted to the ultra-high temperature range of 2000-3000 degrees C. In this study, with the aim of developing non-contact measuring techniques of mechanical deformation under ultra-high temperature, a high heat flux (similar to 300 MW) comprehensive experimental platform is established, which includes a vacuum chamber, a three-dimensional digital image correlation (3D-DIC) system, infrared radiation thermometers and an electron beam heating system. Using the electron beam heating technique, the tungsten specimen can be heated to over 3000 degrees C. Owing to the use of a vacuum chamber, the thermally induced airflow disturbance at high temperature can be completely removed. Tantalum carbide (TaC) powder is chosen as the speckle material and speckle fabrication technology is developed to adapt ultra-high temperatures under vacuum conditions. In order to suppress the blackbody radiation at high temperature, three schemes based on blue light sources, self-radiating light sources and a dual wavelength optical filter technique are designed for three temperature ranges from room temperature to 3067 degrees C. Afterwards, full-field thermal deformation of the tungsten specimen above 3000 degrees C was determined based on the above strategies using the 3D-DIC technique. The feasibility and accuracy of the proposed methods are verified by comparing the measurement results with the thermal expansion strain data and model from available databases and literature. The standard deviations in different temperature intervals are 50 mu epsilon for 25-1200 degrees C, 100-200 mu epsilon for 1200-1800 degrees C and less than 500 mu epsilon for 1800-3067 degrees C. The proposed methods and technologies are expected to lay a foundation for further developments in strain field measurements at ultra-high temperature.

Experimental Study of High Temperature Failure Behavior of Thermal Barrier Coating Based on 3D Digital Image Correlation of Single camera

A real time deformation evaluation method for surface and interface of thermal barrier coatings during 1100°C thermal shock

Research Progress of Failure Mechanism of Thermal Barrier Coatings at High Temperature via Finite Element Method

Experimental Investigation on High-Temperature Fatigue and Fracture Properties at the Interface Between Thermal Barrier Coatings (tbcs) and Nickel Based Superalloy Substrate

RESEARCH PROGRESS ON THE EXPERIMENTAL MEASUREMENT METHODS OF MECHANICAL PROPERTIES OF THERMAL BARRIER COATINGS

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Failure behavior study of EB-PVD TBCs under CMAS Corrosion and Thermal Shock Cycles

Failure Characteristics and Life Prediction for Thermally Cycled Thermal Barrier Coatings

Characterization of isothermal and cyclic thermal damage of EB-PVD TBCs with the help of the 3D-DIC technique

Measurement of the Elastic Modulus and Residual Stress of Thermal Barrier Coatings Using a Digital Image Correlation Technique

THz-TDS characterization of stress evolution of EB-PVD TBCs under thermal cycling

An Elevated-Temperature Depth-Sensing Instrumented Indentation Apparatus for Investigating Thermo-Mechanical Behaviour of Thermal Barrier Coatings.

Failure of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings System under Cyclic Thermo-Mechanical Loading with a Thermal Gradient

Laser Thermal Gradient Testing and Fracture Mechanics Study of a Thermal Barrier Coating

Strain Field Measurements over 3000 °C Using 3D-Digital Image Correlation

Failure Mechanism of EB-PVD Thermal Barrier Coatings under the Synergistic Effect of Thermal Shock and CMAS Corrosion

High-temperature Optical Techniques Development and Its Application in Thermal Barrier Coatings

LC/8YSZ TBCs Thermal Cycling Life and Failure Mechanism under Extreme Temperature Gradients

The failure mechanisms of TBC structure by moiré interferometry

Experimental investigation on detection of coating debonds in thermal barrier coatings using vibrothermography with a piezoceramic actuator

Failure Behavior Study of EB-PVD TBCs under Salt Spray Corrosion and Thermal Shock Cycles