Abstract:Aiming to obtain a martensite-free microstructure of Ti–Zr alloys with a combination of enhanced deformability and improved mechanical properties for dental application, two high Zr-containing Ti-based alloys were prepared with commercially pure titanium as a control. The effects of Zr addition on the deformation mechanism, microstructure and mechanical properties were investigated. After thermo-mechanical processing and cold deformation, samples were characterized using Vickers microhardness, tensile tests, X-ray diffraction (XRD) scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD and TEM examinations revealed that the increasing Zr addition suppressed the deformation twining and favored the deformation-induced face-centered cubic (FCC) phase, the corresponding reason was discussed. There is a competition between the deformation twin and FCC phase. The two types of FCC phase were simultaneously found with orientation relationships (ORs) of Basal-type: <11–20>HCP//<110>FCC and {0001}HCP//{111}FCC and Prismatic-type: <0001>HCP//<001>FCC and {10-10}HCP//{110}FCC. This phase transformation enhanced the deformability during processing. As the Zr addition increased, the microhardness, mechanical strength and plasticity are increased concurrently. The interactions of twins were found to cause brittle fracture of Ti20Zr alloy. Based on the texture analysis, the activated slip systems of FCC phase were determined via calculating the Schmid factor. The FCC phase not only provided additional slip systems but also impeded dislocation slip effectively, improving the strength-plasticity of Ti30Zr alloy. The findings will provide a novel approach associated with the strengthening-toughening mechanism of metallic materials.

Effect of Zr Addition on the Microstructure and Tribological Property of the Anodization of Ti-6Al-4V Alloy

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of Zirconium Content on the Microstructure and Corrosion Behavior of As-Cast Ti-Al-Nb-Zr-Mo Alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effect of Zr Addition on Microstructures and Mechanical Properties of Ni-46Ti-4Al Alloy

Effect of zirconium content on the microstructure, physical properties and corrosion behavior of Ti alloys

The Effects of Zr Contents on Microstructure and Properties of Laser Additive Manufactured Ti-6.5Al-3.5Mo-0.3Si-xZr Alloys

Influence of Zr on Structure, Mechanical and Thermal Properties of Ti–Al–N

Design of amorphous-nanocrystalline films of TiAlCrNbZr x multi-component alloy: The effect of Zr on the corrosion resistance and mechanical properties

Effect of Zr on Microstructure and Mechanical Properties of Binary TiAl Alloys

Effect of Zr on microstructure and properties of TC4 alloy fabricated by laser additive manufacturing

Effect of Zr Addition on Microstructure and Properties of Cu–Ag–Ti Alloys

Investigation on corrosion behavior of Zr-bearing TA10-based titanium alloys

Coordinately Improving the Wear and Fatigue Properties of Ti6Al4V Alloy by Designed CrZr-alloyed Layer

Effect of Zr content on microstructure and wear behavior of Al-Si-Cu-Ni Mg-Zrx alloy

Effect of Zr on Structure and Properties of Ti–Al–N Coatings with Varied Bias

The Effect of Anodization and Thermal Treatment on Mixed-Oxide Layer Formation on Ti–Zr Alloy

Influence of Heterogeneous Microstructures on Anodization Behavior and Biocompatibility of Ti-15Zr Alloy

Effect of Variation in Zr Content on Microstructure and High-Temperature Tensile Properties of a Γ-Tial Alloy

Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys

Influence of Minor Zr and Ti on Microstructures and Properties of Al–8·6Zn–2·5Mg–2·2Cu Alloys