Abstract:In order to accurately characterize and evaluate dust particle diffusion in the dynamic tunneling process of a boring machine, this study considers the 31,116 main transport chute heaving face of the Lijiahao coal mine as a case study. A dynamic tunneling model is developed considering the real dynamic tunneling state of the header, to carry out an in-depth analysis of the spatial and temporal evolution of wind flow and dust dispersion in the tunnel under dynamic excavation. In addition, the results were compared against the calculations of a static standard excavation model of a conventional header. Employing CFD analysis accompanied by field measurements, it was highlighted that the dynamic tunneling of the header leads to an increase in the pressure difference and the turbulent kinetic energy at the working face. Moreover, an increase in the number of vortices was reported, and a higher concentration of dust spreads more quickly along the return wind side wall to the return flow area. On the other hand, the high concentration of dust under the standard tunneling model was found to accumulate a lot on the return wind side. Simultaneously, as the distance between the pressurized air outlet and the working face increases, the average wind speed in the vortex-type wind flow area at the front of the tunnel decreases. When t = 60 s, the return flow area expands to a space of 8 m~24 m from the head, and the dust accumulated above the header spreads to the back of the header to form a high concentration dust region of more than 500 mg/m3. It was shown that the range of high-concentration dust clouds in the breathing zone decreases compared to the results of the standard tunneling model. Moreover, the dust concentration in the breathing zone of the driver is significantly lower than that reported by the standard tunneling model. Based on the results of the field test, the average error between the simulated and measured data of the dynamic tunneling model was calculated to be around 6.46%, thus demonstrating the model's capability in describing the real working conditions of the heave tunnel.

Dust Removal of Large Cross-Section Tunnels: Following Ventilation and Its Adjustment Strategy

A. I. Pavlovsky Prize

Investigation of efficient dust control strategy for construction tunnels: Ventilation System's implications for cleaner production

CFD-based simulation study of dust transport law and air age in tunnel under different ventilation methods

Optimization of dust removal performance of ventilation system in tunnel constructed using shield tunneling machine

Analysis and comparison of airflow-respirable dust control and innovative ventilation environment in drilling construction tunnels

Research on dust control technology and numerical simulation of conical guiding air curtain in fully mechanized excavation face

Research on the control law of dust in the main ventilation system in excavated tunnels for cleaner production

Numerical simulation of flow field characteristics and pollutant transport under different ventilation modes

The control effect of 3D spiral wind-curtain generator on respirable dust pollution during tunnelling process

Study on Dust Movement in Long Tunnel during Blasting Period

A Time Varying Ventilation and Dust Control Strategy Based on the Temporospatial Characteristics of Dust Dispersion

Comparative study of dust pollution and air quality of tunnelling anchor integrated machine working face with different ventilation

Numerical analysis of different ventilation schemes during the construction process of inclined tunnel groups at the Changheba Hydropower Station, China

Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement

Impact analysis of dust evolution pattern and determination of key ventilation parameters in highland highway construction tunnels

Experimental and numerical simulation study on forced ventilation and dust removal of coal mine heading surface

The optimization of a dust suppression and clean production scheme in a TBM-constructed tunnel based on an orthogonal experiment

Design and application of a dust suppression technology of the forcing air curtain in fully mechanized rock tunnelling faces

Numerical analysis and control technology of gas accumulation in a large-scale specially-shaped tunnel passing through coal bearing strata

Influences of ventilation parameters on flow field and dust migration in an underground coal mine heading