Abstract:A simple procedure has been developed for the processing of silicon wafers in order to facilitate the spatially resolved growth of thin solid films on their surfaces. Specifically, a combination of silylation and UV/ozonolysis was tested as a way to control the concentration of the surface hydroxo groups required for subsequent atomic layer deposition (ALD) of metals or oxides. Water contact angle measurements were used to evaluate the hydrophilicity/hydrophobicity of the surface, a proxy for OH surface coverage, and to optimize the UV/ozonolysis treatment. Silylation with hexamethyldisilazane, trichloro(octadecyl)silane, or trimethylchlorosilane was found to be an efficient way to block the hydroxo sites and to passivate the underlying surface, and UV/O3 treatments were shown to effectively remove the silylation layer and to regain the surface reactivity. Both O3 and 185 nm UV radiation were determined necessary for the removal of the silylation layer, and additional 254 nm radiation was found to enhance the process. Attenuated total reflection-infrared absorption spectroscopy was employed to assess the success of the silylation and UV/O3 removal steps, and atomic force microscopy data provided evidence for the retention of the original smoothness of the surface. Selective growth of HfO2 films via TDMAHf + H2O ALD was seen only on the UV/O3 treated surfaces; total inhibition of the deposition was observed on the untreated silylated surfaces (as determined by x-ray photoelectron spectroscopy and ellipsometry). Residual film growth was still detected on the latter if the ALD was carried out at high temperatures (250 °C), because the silylation layer deteriorates under such harsh conditions and forms surface defects that act as nucleation sites for the growth of oxide grains (as identified by electron microscopy and scanning electron microscopy). We believe that the silylation-UV/O3 procedure advanced here could be easily implemented for the patterning of surfaces in many microelectronic applications.

End-Blocked Silanization of Side-Chain Fluoroalkyl Oligoether and its Surface Properties

Preparation and Tribological Behaviors of an Amide-Containing Stratified Self-Assembled Monolayers on Silicon Surface

PERSISTENT HYPERINSULINAEMIC HYPOGLYCAEMIA OF INFANCY: LONG‐TERM TREATMENT WITH THE SOMATOSTATIN ANALOGUE SANDOSTATIN †

The surface-segregated nanostructure of fluorinated copolymer-poly(dimethylsiloxane) blend films

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Properties and Characterization of Novel Cationic Polyacrylate Latex Containing Fluorine and Silicon Prepared with Soap-Free Emulsion Polymerization

Synthesis of Fluorinated Polyester Used for Hydrophobic Coating: Influence of Fluoroalkyl Group Length on Enrichment Behavior

Hydrophobicity and corrosion resistance of waterborne fluorinated acrylate/silica nanocomposite coatings

Preparation and Thermal Stability of Polyorganosiloxane Superhydrophobic Film by Sol-Gel Method

Preparation of Fluoroalkyl-Acrylate-Modified Polysiloxane Nanocomposite and Its Surface Properties as a Superhydrophobic Coating Material

Electrochemical and mechanical properties of superhydrophobic aluminum substrates modified with nano-silica and fluorosilane

Fluoroalkylsilanes with Embedded Functional Groups as Building Blocks for Environmentally Safer Self-Assembled Monolayers.

Tuning the Hydrophobicity of ZSM-5 Zeolites by Surface Silanization Using Alkyltrichlorosilane

Design and High-Resolution Characterization of Silicon Wafer-like Omniphobic Liquid Layers Applicable to Any Substrate.

Preparation and Properties of Superhydrophobic Fluoroalkylsilane Coatings

Spatial resolution in thin film deposition on silicon surfaces by combining silylation and UV/ozonolysis

Tunable Water-Based Lubrication Behavior of Alkyl- and Fluoroalkyl-Silanes

Preparation of superhydrophobic surfaces and slippery liquid-infused porous surfaces based on core-cross-linked nanostructured materials obtained by living coordination block copolymerization through PISA process

NUMERICAL MODELING OF THE EARLY LIGHT CURVES OF TYPE IIP SUPERNOVAE

The Core-Shell Structured Aqueous Dispersions of the Siloxane-Grafted Polyurethane Copolymers with High Transparency

Synthesis and Characterization of Durable Antifog Silane–Pyrrolidone Thin Coatings onto Polymeric Films