Abstract:In order to study the characteristics of fire smoke spread and temperature distribution of a large indoor pedestrian street under different heat release rates and smoke exhaust modes, this paper focuses on the analysis of fire smoke spread, visibility, smoke temperature distribution and variation curves in an atrium. This paper uses a numerical simulation method to conduct research. PyroSim fire simulation software is used to calculate this project, which is based on a full-scale experimental design scheme. The numerical simulation results show that under the conditions of higher heat release rate, the smoke spread rate is greater than that under the conditions of lower heat release rate. Furthermore, the average temperature of smoke in the atrium is also greater, up to about 400 °C. The conditions of a higher heat release rate also show the characteristics of faster generation, faster spread and a larger volume of smoke. When the smoke exhaust system is turned on, the thickness of the smoke layer and the smoke temperature decrease. There then comes a situation where the stabile section of the fire ends in advance. The simulation results of vertical temperature distribution in an atrium can fit the modified McCaffrey plume model in any case. Under all cases, the smoke temperature reaches the maximum directly above the fire source. The horizontal dimensionless smoke temperature rises under the atrium roof, and decreases exponentially with the dimensionless distance from the fire source. The greater the heat release rate of fire source is, the smaller the attenuation coefficient is, with a more than 50% change. When the smoke exhaust system is turned on, the smoke flow accelerates and the smoke is cooled rapidly. Thus, the attenuation coefficient increases. Additionally, the effect of mechanical smoke exhaust is better than natural smoke exhaust, because mechanical smoke exhaust makes air flow and heat exchange more intense. The variation amplitudes of the attenuation coefficient under natural smoke exhaust and mechanical smoke exhaust are 13% and 22%, respectively.

Simulation Study on Air Curtain and Smoke Exhaust System of Long Corridor High-rise Building with Regional Ecological Environment Characteristics

Application of Computer Simulation Technique in Smoke Control System Design

Computational Simulation of Smoke Temperature Diffusion in High-rise Buildings Fires

Numerical Simulation of the Fire Smoke Flow in the Corridor of a Building

Simulation on the Smoke Transport Process to Remote Room During a Residential Building Fire Based on FDS

Numerical Studies of Fire Smoke Movement and Control in Typical Building Based on Different Boundary Configurations

Numerical Investigation on Smoke Movement in a Large Space Building under Fire Scenarios

Numerical simulation analysis on corridor smoke abatement and evacuation way in high civil architecture

Computational simulation of smoke temperature diffusing in high-rise building fire

Study on an Intelligent Smoke Control System in a Modern Building

Computer simulation development of smoke diffusing and control in fires of high-rise buildings

Full-scale Experimental and Numerical Study of Smoke Spread and Temperature Distribution in a Room-Corridor Structure Building

Computational Fluid Dynamics-Assisted Smoke Control System Design for Solving Fire Uncertainty in Buildings

Numerical Simulation of Fire Smoke Spread in a Super High-Rise Building for Different Fire Scenarios

Full-scale experimental study on thermal smoke movement characteristics in an indoor pedestrian street

Effect of Outdoor Wind on the Efficiency of Mechanical Smoke Exhaust in High-rise Building Fires

Numerical Simulation on Smoke Temperature Distribution in a Large Indoor Pedestrian Street Fire

Numerical Simulation for Fire Smoke Flow in a High-rise Building with Patio Space

Study on Smoke Control Strategy in a High-rise Building Fire

Simulation of Full-scale Smoke Control in Atrium

Risk analysis research of fire smoke in the corridor of an university teaching building