Abstract:Due to frequently occurred three-phase unbalanced loads in the ends of large number of branches in distribution networks, it is difficult to extract reflected wave of the fault point in the complex reflected and refracted waves using the traditional single-terminal traveling wave methods. Simultaneously the precision of the fault location methods based on the difference of wave velocity between zero-mode component and line-mode component of traveling waves and the one based on mutation of line-mode traveling wave are decided by the unstable zero-mode wave velocity. Therefore, a new approach is proposed by combining the above two methods to achieve higher efficiency and precision of measuring the fault distance and location. The presented method employs the correspondence between the detected zero-mode wave velocity and the fault distance to achieve the fault location algorithm which is not impacted by zero-mode wave velocity. The approach firstly detects difference of arrival time between the zero-mode traveling wave and line-mode traveling wave at the head end. And then post-injecting high voltage pulses into three phases simultaneously and detecting the arrival time of the first line-mode traveling wave head at the head end of the transmission line. Following, it employs the stable line-mode wave velocity to execute the measurement of the fault distance. Finally, PSCAD-based simulation shows that the absolute errors of this algorithm are less than 100 m in all cases, without influence from the fault location, grounding resistance and fault initial phase angle.

Distributed Traveling-Wave-Based Fault-Location Algorithm Embedded in Multiterminal Transmission Lines

A single-terminal fault location algorithm in distribution network for eliminating the effect of the velocity of zero-mode traveling wave

An Efficient PMU-Based Fault-Location Technique for Multiterminal Transmission Lines

Waveform Recognition Technology in Distributed Fault Location of Transmission Line

Location of Faulty Section and Faults in Hybrid Multi-Terminal Lines Based on Traveling Wave Methods

An Effective Ground Fault Location Scheme Using Unsynchronized Data for Multi-Terminal Lines

A Distributed Fault Location Method For T-Connection Transmission Line

Fault Location Scheme for Multi-Terminal Transmission Line Based on Frequency-Dependent Traveling Wave Velocity and Distance Matrix

Fault Model and Travelling Wave Matching Based Single Terminal Fault Location Algorithm for T-Connection Transmission Line: A Yunnan Power Grid Study

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

Distributed travelling-wave-based fault location without time synchronisation and wave velocity error

Real-time velocity based fault location method of travelling wave for multi-terminal transmission lines

Novel Time-Domain Fault Location Algorithm by Two-Terminal Currents

An Accurate Fault Location Algorithm for Parallel Transmission Lines Using One-Terminal Data

Travelling Waves Based Fault Location Method for Overhead-Cable Hybrid Multi-Terminal Transmission Line

Eliminating the Dependence of GPS or Communication Latency Estimation in Traveling Wave Based Double-Terminal Fault Location

Fault Location on Multi-Branch Network Using Traveling Wave and Graph Theory

Traveling-wave-based Fault Location Algorithm for Star-Connected Hybrid Multi-Terminal HVDC System

Three-terminal Fault Location Method for Travelling Wave Removing Influence of Wave Velocity

A non-contact current traveling wave fault location method for multi-terminal overhead power lines based on adaptive mathematical morphology

Accurate Fault Location Technology for Multi-branch Transmission Lines Based on Distributed Detection