Abstract:Three-dimensional braided carbon fiber/epoxy resin composites are significant structural materials in the fields of astronauts and aeronautics. The effect of the process and test parameters on the mechanical properties was studied in this paper. Optical microscope and field emission gun scanning electron microscope (SEM) were used to analyze the macro- and micro-fracture morphology. The fracture morphology of the three-dimensional braided carbon fiber/epoxy resin composites was varied under different loading rates. The results indicate that the mechanical properties can be significantly affected by the parameters of braiding. By decreasing the braided angle the elastic modulo E and ultimate tensile strength showed an obvious increase. The fracture process depends on stress transfer behavior. The fracture characteristic was brittle, which originated from plastic constraint at the fiber. Fiber fracture was caused by a defect on the surface of the carbon fiber in low loading rate. As the explosive impact test was carried out in a special attachment, superior energy absorption capability and damage tolerance were found. Due to high bursting pressure a surface ablation region was formed and a notch was observed in the region. The fibers in the surface ablation region were sheared off and pulled out. The fracture of fiber was scarcely related to any fiber defects in this region. There was a damage region under the ablation layer. Fracture morphology revealed that the epoxy area between fibers showed crack growth traces, which looked like a river pattern. The river pattern is the sign of brittle fracture and the direction of the river pattern is toward the direction of crack spreading. The fracture process showed that damage formation were fiber sheared off and epoxy flaked off under the ablation region. The propagation path of the macro-crack is mainly in the braided sheaf and along the sheaf interface under the ablation region.

Dynamic Response and Research of 3D Braided Carbon Fiber Reinforced Plastics Subjected to Ballistic Impact Loading

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Ballistic impact testing and analysis of triaxial braided composite fan case material

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

A Progressive Damage Model for Three-Dimensional Woven Composites under Ballistic Impact Loading

Finite Element Analysis of 4-Step 3-Dimensional Braided Composite Structure under High Velocity Impact

STUDY ON DAMAGE MECHANISM OF PLAIN WEAVE COMPOSITE UNDER HIGH VELOCITY IMPACT

Experimental Investigation of Normal and Oblique Impacts on CFRPs by High Velocity Steel Sphere

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite under High Velocity Impact: Experimental and Numerical Study

Numerical Simulation on Damage and Failure in 3-Dimensional Braided Composites Structure Against Bird Strike

The Experiment and Damage Mode of 3D Orthogonal Woven Composite under Ballistic Impact

Low-velocity Impact Damage Research on CFRPs with Kevlar-fiber Toughening

Ballistic performance and damage analysis of CFRP laminates under uniaxial pretension and precompression

Progressive Failure Numerical Simulation and Experimental Verification of Carbon-Fiber Composite Corrugated Beams under Dynamic Impact

Finite Element Analyses on Low-velocity Impact Responses of Three-dimensional Braided Composites

On the Impact Failure Behavior of Triaxially Braided Composites Subjected to Metallic Plate Projectile

Dynamic damage and fracture mechanism of three-dimensional braided carbon fiber/epoxy resin composites

Dynamic fracture in CFRP laminates: Effect of projectile mass and dimension

Experimental investigation on high-velocity impact damage and compression after impact behavior of 2D and 3D textile composites

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Impact Resistance Study of Three-Dimensional Orthogonal Carbon Fibers/BMI Resin Woven Composites