Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Focusing on the energy absorption characteristics of ultra-high molecular weight polyethylene (UHMWPE) fiber laminated panels, this study conducts ballistic tests and numerical simulations using 6 mm spherical projectiles to impact the UHMWPE laminated panels. The residual velocity characteristics, energy absorption patterns, and failure modes of the UHMWPE laminated panels under steel ball impacts were analyzed. The results show that the residual velocity of the steel ball increases with the increase of the incident velocity. In the velocity range near the ballistic limit velocity, the residual velocity of the steel ball increases sharply. When the incident velocity exceeds 340 m/s, the increase in residual velocity gradually slows down, tending towards a straight line. When the steel ball velocity is less than 330 m/s, the energy absorption of the UHMWPE laminated panels exhibits linear growth with increasing velocity, with a maximum energy absorption of 47.3 J. In the 327–340 m/s velocity range, the energy absorption of the laminated panels drops sharply from 47 J to around 30 J. In the 340 m/s–600 m/s velocity range, the decline in energy absorption gradually becomes more moderate, decreasing to around 20 J. Beyond 500 m/s, the energy absorbed by the UHMWPE laminated panels stabilizes with increasing velocity, and the fiber tensile failure is the main form of energy absorption of UHMWPE composite laminates under ballistic impact. The failure process of UHMWPE laminated panels presents a multi-stage failure mode, including fiber shear failure, tensile failure, and delamination. As the projectile's incident velocity increases, the damage mechanism of the UHMWPE laminated panels transitions from tensile-dominated to shear plugging-dominated. Through similarity theory analysis, under certain conditions, the ballistic limit velocity and the dimensionless parameter of unit energy absorption for the UHMWPE laminated panels satisfy geometric similarity.

Ballistic performance and damage analysis of CFRP laminates under uniaxial pretension and precompression

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Ballistic impact testing and analysis of triaxial braided composite fan case material

Perforation of carbon fiber reinforced plastic laminates struck transversely by hemispherical-nosed projectiles

Investigation of the Ballistic Performance of GFRP Laminate under 150 m/s High-Velocity Impact: Simulation and Experiment

Study on High-Velocity Impact Perforation Performance of CFRP Laminates for Rail Vehicles: Experiment and Simulation

An investigation on the perforation resistance of laminated CFRP beam and square plate

Low-Velocity Impact Behavior and Damage Characteristics of CFRP Laminates

Investigating ballistic resistance of CFRP/polyurea composite plates subjected to ballistic impact

Dynamic fracture in CFRP laminates: Effect of projectile mass and dimension

Impact responses and residual flexural properties of narrow CFRP laminates

Experimental investigation on the low‐velocity impact response and the residual strength of CFRP tubes

Experimental investigation of the performances of thick CFRP, GFRP, and KFRP composite plates under ballistic impact

Dynamic performance of ultralight corrugated sandwich plate with FML face-sheets impacted by FSP-foam composite projectile

An analytical model to predict the impact of a bullet on ultra-high molecular weight polyethylene composite laminates

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

Experimental and numerical study on the ballistic impact resistance of the CFRP sandwich panel with the X-frame cores

Mechanism-Driven Analytical Modelling Of Uhmwpe Laminates Under Ballistic Impact

The penetration resistance behavior and corresponding size effects of ultra-high molecular weight polyethylene composite laminates