Abstract:Two types of warheads were used to carry out high‐speed impact experiments on four kinds of laminated fiber‐metal laminates. In this work, the failure mode and ballistic protection capability of the carbon fiber aluminum alloy laminated target plate under the impact of high‐speed projectile body were studied by ballistic impact test. The effects of the lamination sequence and warhead shape difference on the impact resistance of the laminated aluminum alloy and carbon fiber laminates were analyzed. Two kinds of projectile bodies, flat and oval head, were used to carry out multiple high‐speed impact experiments on four groups of targets with different stacking sequences. By analyzing the result, it is found that the lamination sequence of the target plate has a significant effect on the anti‐impact performance only when the flat head projectile impacts, while the ovoid projectile has almost no effect. In the fiber‐metal composite configuration, the aluminum plate placed in front of the carbon fiber plate showed the best resistance to flat head bullet impact, the ballistic limit speed reached 135 m/s, and the overall impact resistance improved by up to 26% compared with other configurations. Unlike the shear failure caused by flat head projectile, ovoid projectile impact can cause serious tensile and tear damage. Based on the experimental results, it is clear that the laminated structure has better penetration resistance against the flat head projectile, and the placement of aluminum plate on the impact surface can change the failure mode of carbon fiber laminates and improve the energy absorption level of composite plates. Highlights Unlike traditional fiber‐metal laminates, the target plate used in this experiment does not use adhesive, which makes the deformation of the two materials will not affect each other, which is conducive to the study of its own impact resistance. The mechanical behavior and damage failure mode of the target plate under high speed impact load were studied. The impact of ovoid projectile changes the damage failure mode of the target plate. For the configuration of fiber‐metal laminates, the ballistic limit value is as low as 100 m/s, and the energy absorption value fluctuates in the range of 145–190 J with the change of impact velocity. Compared with ovoid projectile, laminated material has stronger impact resistance to flat head projectile. The metal plate arranged on the impact surface can change the damage mode from shear failure to tensile failure, thus greatly improving the ballistic limit and impact resistance, overall impact resistance can be improved by up to 26%.

Experimental investigation of the performances of thick CFRP, GFRP, and KFRP composite plates under ballistic impact

Experimental and numerical analysis of ballistic impat and material characterization of GFRP and Kevlar 29/epoxy composite laminate

Investigation of the Ballistic Performance of GFRP Laminate under 150 m/s High-Velocity Impact: Simulation and Experiment

Ballistic performance and damage analysis of CFRP laminates under uniaxial pretension and precompression

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Investigating ballistic resistance of CFRP/polyurea composite plates subjected to ballistic impact

Experimental and Numerical Analysis of the Damage Mechanism of an Aramid Fabric Panel Engaged in a Medium-Velocity Impact

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

Damage Behaviors of Thin and Thick Laminated Composites Under Ballistic Effect

Experimental Investigation of Normal and Oblique Impacts on CFRPs by High Velocity Steel Sphere

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

A combined experimental/numerical study on the scaling of impact strength and toughness in composite laminates for ballistic applications

Experimental and numerical study on the ballistic impact resistance of the CFRP sandwich panel with the X-frame cores

Effect of lamination sequence and warhead shape on impact resistance of fiber‐metal laminates

Evaluation of Projectile Penetration Position on Perforated Plate on Ballistic Resistance of Composite Sandwich Panels

Perforation of Frp Laminates under Impact by Flat-Nosed Projectiles

Experimental and Numerical Investigations of Composite Plates Under Impact Load

Dynamic fracture in CFRP laminates: Effect of projectile mass and dimension

Effect of fiber architecture on the impact resistance of composite panels subjected to metallic projectile

The ballistic performance of STF impregnated Kevlar fabric coating GFRP composite structure

An investigation of the ballistic impact behavior of multi-layered armor structure