Abstract:Morphologies of the titanium sample were investigated via the Industrial CT system.The systematic research on the conoidal fracture was carried out by the simulation.The periods of three damage zones in which cracks exist are not independent.Effects of stress triaxiality on the crack initiation of three zones are clarified.In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler–Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from -2.0 to -1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the formation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0–1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.

On the Impact Failure Behavior of Triaxially Braided Composites Subjected to Metallic Plate Projectile

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Ballistic impact testing and analysis of triaxial braided composite fan case material

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Study on the Post-impact Damage Tolerance of Composite Stiffened Plates

Finite Element Analysis of 4-Step 3-Dimensional Braided Composite Structure under High Velocity Impact

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Numerical Simulation on Damage and Failure in 3-Dimensional Braided Composites Structure Against Bird Strike

STUDY ON DAMAGE MECHANISM OF PLAIN WEAVE COMPOSITE UNDER HIGH VELOCITY IMPACT

Experimental Investigation of Low-Velocity Impact Behavior and CAI on Composite Laminates by Discrete Interleaved Toughening

Dynamic Response and Research of 3D Braided Carbon Fiber Reinforced Plastics Subjected to Ballistic Impact Loading

Impact Resistance Study of Three-Dimensional Orthogonal Carbon Fibers/BMI Resin Woven Composites

Multi-scale Finite Element Analysis for Tension and Ballistic Penetration Damage Characterizations of 2D Triaxially Braided Composite

High-velocity Impact Behaviors and Post-Impact Tension Performance of 2D-C/sic Composite Beams

Experimental and Numerical Investigation of the Behavior of Three-Dimensional Orthogonal Woven Composite Plates under High-Velocity Impact

Experimental investigation on high-velocity impact damage and compression after impact behavior of 2D and 3D textile composites

A STUDY ON THE FAILURE MECHANISMS OF COMPOSITE LAMINATES SIMULTANEOUSLY IMPACTED BY TWO PROJECTILES

Effect of fiber architecture on the impact resistance of composite panels subjected to metallic projectile

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti- and Al-alloy layers

High-velocity impact characteristics of 3D auxetic composite cylindrical shell panels: Theory and experiment

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite under High Velocity Impact: Experimental and Numerical Study