Abstract:Finite element analysis of three‐dimensional woven tubular composites under low‐velocity impacts. In this study, experiments combined with finite element analysis (FEA) were used to investigate the damage mechanism of transverse low‐velocity impacts on three‐dimensional woven tubular composites (3DWTC) with different structures. The damage morphology after impact was observed using three‐dimensional microscopy and scanning electron microscopy (SEM). Three mesoscale models were constructed based on the authentic structure of the 3DWTC. Additionally, the effects of the structure type on the impact resistance, stress distribution, and damage morphology of 3DWTC were studied. The impact resistance of the shallow cross‐linked (SCL) structure is the strongest, according to the data. The structure that resists impacts the least is the through orthogonal (TO) structure. The greater the straightness of the warps in the structure, the density of the weft, the volume fraction, the greater the cooperative load‐bearing capacity of the warps and wefts, and the greater the speed of stress propagation. The wefts and inner warps are subjected to tensile forces at the point of impact. The outer warps are subjected to compression. The stresses are distributed in a cross‐shaped pattern. The straightened warp and weft parts of the TO serve a key structural role in load‐bearing. The warps of the SCL and the shallow‐crossed curved joint (SCCJ) structure serve a key structural role in the load‐bearing capacity. Highlights The impact resistance of 3DWTCs was investigated. The tensile state, stress propagation rate of 3DWTC were analyzed using the mesoscale model. The main load‐bearing components are revealed. The differences in damage morphology of 3DWTCs are analyzed.

Finite Element Analysis of 4-Step 3-Dimensional Braided Composite Structure under High Velocity Impact

Numerical Simulation on Damage and Failure in 3-Dimensional Braided Composites Structure Against Bird Strike

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Ballistic impact testing and analysis of triaxial braided composite fan case material

Finite Element Analyses on Low-velocity Impact Responses of Three-dimensional Braided Composites

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Finite Element Analysis of Bird Impact Damage to Representative Beam-Edge Structure

Dynamic Response of a Composite Reinforced Panel to Bird Strike

Transverse Impact Responses and Failure Mechanism of 3D Braided Composites by Mesostructure Model

Analysis of the Anti-Bird Impact Performance of Typical Beam-Edge Structure Based on Ansys/Ls-Dyna

Development and experimental verification of a modified constitutive model for 3D orthogonal woven composite under bird impact

A Progressive Damage Model for Three-Dimensional Woven Composites under Ballistic Impact Loading

Comparative Analysis of Experimental Results and Finite Element Simulation Results of Ballistic Impact on 3D Woven Reinforced Composites

Analysis of the Bird Impact Resistance of Different Beam-edge Structures

Transverse impact performance and finite element analysis of three‐dimensional woven tubular composite with different structures

Dynamic Response and Research of 3D Braided Carbon Fiber Reinforced Plastics Subjected to Ballistic Impact Loading

Research on the Impact Damage and Fracture Behaver of Braided Composites

Impact dynamic characteristics of braided composite fuselage frame

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Impact Resistance Study of Three-Dimensional Orthogonal Carbon Fibers/BMI Resin Woven Composites

On the Impact Failure Behavior of Triaxially Braided Composites Subjected to Metallic Plate Projectile