Abstract:Cylindrical Al 2 O 3 /GdAlO 3 binary in situ oxide eutectic ceramic composite, with a glossy surface and high relative density, has been fabricated using the laser directed energy deposition method (LDED) with optimized process parameters. In a novel and innovative approach, infrared thermal imaging and the finite element method (FEM) have been combined for the first time to capture the temperature field distribution across different regions of the molten pool during the LDED processing of the binary oxide eutectic ceramic composite, thereby synergistically obtaining the solidification characteristics. With an increase in the scanning rate, the temperature gradient within the molten pool decreases from 3.38 × 10 5 K/m to 1.62 × 10 5 K/m, while it shows minimal variation with fluctuations of the laser power. Under the conditions of high temperature gradients and rapid non-equilibrium solidification characteristic of LDED, the Al 2 O 3 /GdAlO 3 (GAP) binary eutectic ceramic composites, which exhibit typical high melting entropy and faceted/non-faceted growth modes, exhibit complex and variable microstructure morphology. A combination of regular/irregular models, including JH (Jackson-Hunt), MK (Magnin-Kurz), GK (Guzik-Kopyciński) and TMK (Trivedi-Magnin-Kurz), is employed to investigate and predict the growth and transformation of microstructures. The JH and TMK models fairly predict the rod-like regular eutectic microstructure inside the colony and lamellar regular eutectic within adjacent layers, respectively. The "Chinese-script" irregular microstructure at the interface between the colony and the layers is consistent with the MK and GK models. The as-deposited eutectic ceramic composite presents ultra-fine microstructures, clear and strongly bonded phase interfaces with low strain energy, contributing to its microstructure stability after high temperature heat treatment at 1773 K for 200 h, and achieving a minimum microstructure coarsening rate of 0.0005 μm/h.

Formation Mechanism of a Wrinkled and Textured Al2O3-ZrO2 Nanoeutectic Rapidly Solidified from Oxy-Acetylene Flame Remelting

Nucleation and Epitaxial Growth of Highly Textured Al2O3–ZrO2 Nanoeutectic Rapidly Solidified from Oxyacetylene Flame Remelting

Nanojoint Formation Between Ceramic Titanate Nanowires and Spot Melting of Metal Nanowires with Electron Beam

In Situ Fabrication and Microstructural Evolution of Al2O3-ZrO2 Nanoeutectic Ceramics by a Novel Pulse Discharge Plasma Assisted Melting Method

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Enhanced Nucleation Undercooling and Surface Self-Nanocrystallization of Al2O3-ZrO2(Y2O3) Eutectic Ceramics

Microstructural Characterization of Nanostructured Al2O3-ZrO2 Eutectic Layer by Laser Rapid Solidification Method

Grain Size Dependence, Mechanical Properties and Surface Nanoeutectic Modification of Al2O3-ZrO2 Ceramic

Insights into Microstructural Formation of Pulse Plasma Semisolid to Liquid Processing of Al2O3–ZrO2 Eutectic Ceramics

Ke ICROSTRUCTURE AND MECHANICAL PROPERTIES OF EUTECTIC COMPOSITE CERAMIC Al 2 O 3 / ZrO 2 BY EXPLOSION SYNTHESIS

Morphology and formation mechanism of cracks in Al2O3–ZrO2 eutectic ceramics fabricated via laser powder bed fusion

Unveiling solidification mode transition and crystallographic characteristics in laser 3D-printed Al2O3-ZrO2 eutectic ceramics

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Microstructure and mechanical properties of eutectic composite ceramic Al2O3/ZrO2 by explosion synthesis

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition

Microstructural refinement and mechanical response of Al2O3–ZrO2 eutectics fabricated by a novel pulse discharge plasma assisted melting method

Microstructure Evolution Of Melt-Grown Al2o3/Zro2/Yag Eutectic Ceramic By High Temperature Fused Method

Crystallography and Interfacial Structure in a Directionally Solidified Al2O3/Y3Al5O12/ZrO2 Eutectic Crystal

Tailoring the Morphology in Y2O3 Doped Melt-Grown Al2O3/ZrO2 Eutectic Ceramic

Microstructural formation and evolution of near-eutectic Al2O3–ZrO2 powders prepared by a rapid cooling technique: An exploration on coupled eutectic growth range

Nanocrystalline Alumina-Zirconia-Based Eutectic Ceramics Fabricated with High-Energy Beams: Principle, Solidification Techniques, Microstructure and Mechanical Properties