Abstract:During the directional solidification of Al 2 O 3 -based eutectic ceramic composites, crystallographic orientation control is a promising method for tailoring the performances of composite parts. However, despite its importance in the fabrication of texture-controlled structural parts, the stable growth of the eutectic crystallographic texture for long distance (growth distance from 30 mm to 120 mm) in ceramic composite system is not widely understood. Herein, the competition and stability of crystallographic texture for Al 2 O 3 /YAG eutectic ceramic composite induced by different seeds using the Czochralski (CZ) technique were investigated. When the eutectic composites induced by different single crystalline Al 2 O 3 seeds, coarse Al 2 O 3 particles and uniform eutectic structure appeared alternately below the seeds. While the eutectic ceramic composite induced by YAG seed has a memory effect on the stability of its microstructure and morphology. We demonstrated that the eutectic ceramic composites induced by the 〈112 ̄0〉 Al 2 O 3 and 〈101 ̄0〉 Al 2 O 3 seeds could stably inherit the seed orientation and grow as a single crystallographic texture with a low interfacial strain (<10 %). In particular, the stable evolution of crystallographic texture depended not only on the type of seeds but also on the mutual constraint of eutectic coupling growth. Furthermore, the nano-hardness, elastic modulus, and compressive strength (1600 °C) of the composites induced by different seeds have anisotropic characteristics. However, the bending strength was not sensitive to the change of crystallographic texture. It could maintain excellent high temperature stability, which was approximately 265∼316 MPa from room temperature to 1600 °C. These results promote the development of high-performance Al 2 O 3 -based eutectic ceramic composites with anisotropic design using seeding technique to tailor their crystallographic texture.

Tailoring the Morphology in Y2O3 Doped Melt-Grown Al2O3/ZrO2 Eutectic Ceramic

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Microstructure Evolution Of Melt-Grown Al2o3/Zro2/Yag Eutectic Ceramic By High Temperature Fused Method

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Regulation of Y2O3 addition on structure and properties of Al2O3/ZrO2(Y2O3) directionally solidified eutectic ceramic

High Temperature Deformation of Non-Directionally Solidified Al2O3/YAG/ZrO2 Eutectic Bulk Ceramic

Seed-crystal-induced directional solidification toward Al2O3/(Y0.2Er0.2Yb0.2Ho0.2Lu0.2)3Al5O12/ZrO2 ternary eutectic ceramics

Tailoring Multifunctional Performance of Dy-doped (ba0.85ca0.15)(zr0.1ti0.9)o3 Ceramics Via Optimizing Ceramic Processing

In Situ Fabrication and Microstructural Evolution of Al2O3-ZrO2 Nanoeutectic Ceramics by a Novel Pulse Discharge Plasma Assisted Melting Method

Microstructural refinement and mechanical response of Al2O3–ZrO2 eutectics fabricated by a novel pulse discharge plasma assisted melting method

Directional solidification and growth characteristics of Al2O3/Er3Al5O12/ZrO2 ternary eutectic ceramic by laser floating zone melting

Effect of Nano Y2O3 Addition on Microstructure and Room Temperature Tensile Properties of Ti–48Al–2Cr–2Nb Alloy

Microstructural formation and evolution of near-eutectic Al2O3–ZrO2 powders prepared by a rapid cooling technique: An exploration on coupled eutectic growth range

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Complex Structural Hierarchies Observed in Y2O3–Al2O3–SiO2 Eutectic Ceramics Prepared by Laser Melting

Crystallography and Interfacial Structure in a Directionally Solidified Al2O3/Y3Al5O12/ZrO2 Eutectic Crystal

Cr-doped Al2O3-YAG binary and Al2O3-YAG-ZrO2 ternary eutectic materials crystallized by the micro pulling down technique and their characterization

Stability of crystallographic texture and mechanical anisotropy toward Al 2 O 3 /YAG eutectic ceramic composite using single crystalline seeds

Insights into Microstructural Formation of Pulse Plasma Semisolid to Liquid Processing of Al2O3–ZrO2 Eutectic Ceramics

Microstructure and Mechanical Properties of Al2O3/YAG Eutectic Ceramic Grown by Horizontal Directional Solidification Method

Microstructure Evolution of Ceramic Materials During Solidification from Melts in High-Gravity Combustion Synthesis