Abstract:During the directional solidification of Al 2 O 3 -based eutectic ceramic composites, crystallographic orientation control is a promising method for tailoring the performances of composite parts. However, despite its importance in the fabrication of texture-controlled structural parts, the stable growth of the eutectic crystallographic texture for long distance (growth distance from 30 mm to 120 mm) in ceramic composite system is not widely understood. Herein, the competition and stability of crystallographic texture for Al 2 O 3 /YAG eutectic ceramic composite induced by different seeds using the Czochralski (CZ) technique were investigated. When the eutectic composites induced by different single crystalline Al 2 O 3 seeds, coarse Al 2 O 3 particles and uniform eutectic structure appeared alternately below the seeds. While the eutectic ceramic composite induced by YAG seed has a memory effect on the stability of its microstructure and morphology. We demonstrated that the eutectic ceramic composites induced by the 〈112 ̄0〉 Al 2 O 3 and 〈101 ̄0〉 Al 2 O 3 seeds could stably inherit the seed orientation and grow as a single crystallographic texture with a low interfacial strain (<10 %). In particular, the stable evolution of crystallographic texture depended not only on the type of seeds but also on the mutual constraint of eutectic coupling growth. Furthermore, the nano-hardness, elastic modulus, and compressive strength (1600 °C) of the composites induced by different seeds have anisotropic characteristics. However, the bending strength was not sensitive to the change of crystallographic texture. It could maintain excellent high temperature stability, which was approximately 265∼316 MPa from room temperature to 1600 °C. These results promote the development of high-performance Al 2 O 3 -based eutectic ceramic composites with anisotropic design using seeding technique to tailor their crystallographic texture.

Crystallography and Interfacial Structure in a Directionally Solidified Al2O3/Y3Al5O12/ZrO2 Eutectic Crystal

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Seed-crystal-induced directional solidification toward Al2O3/(Y0.2Er0.2Yb0.2Ho0.2Lu0.2)3Al5O12/ZrO2 ternary eutectic ceramics

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Unveiling solidification mode transition and crystallographic characteristics in laser 3D-printed Al2O3-ZrO2 eutectic ceramics

Regulation of Y2O3 addition on structure and properties of Al2O3/ZrO2(Y2O3) directionally solidified eutectic ceramic

Cr-doped Al2O3-YAG binary and Al2O3-YAG-ZrO2 ternary eutectic materials crystallized by the micro pulling down technique and their characterization

In Situ Fabrication and Microstructural Evolution of Al2O3-ZrO2 Nanoeutectic Ceramics by a Novel Pulse Discharge Plasma Assisted Melting Method

Directional solidification and growth characteristics of Al2O3/Er3Al5O12/ZrO2 ternary eutectic ceramic by laser floating zone melting

Microstructural Characterization of Nanostructured Al2O3-ZrO2 Eutectic Layer by Laser Rapid Solidification Method

Preparation and Microstructure of Large-Sized Directionally Solidified Al2O3/Y3Al5O12 Eutectics with the Seeding Technique

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Unveiling crystallographic texture in laser floating zone melted Al 2 O 3 /YAG eutectic ceramic by seed-crystal inducing

Microstructure Evolution Of Melt-Grown Al2o3/Zro2/Yag Eutectic Ceramic By High Temperature Fused Method

Tailoring the Morphology in Y2O3 Doped Melt-Grown Al2O3/ZrO2 Eutectic Ceramic

Interface interaction during the preparation of TiAl-(Nb, V) quaternary intermetallic single crystals by directional solidification based on Y2O3 doped BaZrO3/Al2O3 composite ceramic mold

<i>Ab initio</i> investigation on preferred orientation at the Al/Al<sub>3</sub>(Zr,Y) interface in Al-Zr-Y alloy

Preparation, Microstructure and Properties of Ternary Al2O3/YAG/ZrO2 Ceramics Hot Pressed with Eutectic Composition Powders

<i>Ab initio</i> investigation on preferred orientation at the Al/Al3(Zr,Y) interface in Al–Zr–Y alloy

Stability of crystallographic texture and mechanical anisotropy toward Al 2 O 3 /YAG eutectic ceramic composite using single crystalline seeds

Competitive Growth of Dendrites and Eutectic in Al2O3/Y3Al5O12 Eutectic Ceramics