Abstract:Regulation of eutectic compositions is a difficult challenge due to the limited formation range of this microstructure. Al2O3–ZrO2 powders were successfully prepared through a modified high-temperature melt-assisted air atomization technique. Micron-sized raw powders of α-Al2O3 and m-ZrO2 were used to regulate the temperature of system and the composition of final products. The high-temperature melt of 3500 K (3227 °C) was obtained based on the exothermic reaction between Al and O2, which was subsequently atomized and quenched to form composite powders. The phase composition and microstructure of the as-prepared powders were characterized by X-Ray diffraction and scanning electron microscopy. Eutectic colonies with nanolamellae (62–79 nm) were observed in the as-prepared Al2O3-(28–58 mol%) ZrO2 powders, with growth rates ranging from 1.9 to 2.8 mm s−1. Importantly, the powders with ZrO2 contents of 38 mol% and 42 mol% showed complete eutectic microstructures without primary dendrites, which indicated an extended coupled growth range deviating by ∼4.9 mol% from the eutectic composition (CE). The microstructural formation mechanism was discussed based on solidification behavior analysis. Furthermore, the evolution of the microstructure and phase in Al2O3-42 mol% ZrO2 powders was investigated. This work aims to develop a novel strategy for preparing oxide powders with eutectic structures and provide a reference for the composition regulation of eutectics.

Microstructure and mechanical properties of eutectic composite ceramic Al2O3/ZrO2 by explosion synthesis

Ke ICROSTRUCTURE AND MECHANICAL PROPERTIES OF EUTECTIC COMPOSITE CERAMIC Al 2 O 3 / ZrO 2 BY EXPLOSION SYNTHESIS

Microstructure, mechanical and thermo-physical properties of hot-pressed Al2O3-GdAlO3-ZrO2 ceramics with eutectic composition

Microstructure and mechanism of Al2O3-ZrO2 eutectic coating prepared by combustion-assisted thermal explosion spraying

Microstructure Evolution Of Melt-Grown Al2o3/Zro2/Yag Eutectic Ceramic By High Temperature Fused Method

In Situ Fabrication and Microstructural Evolution of Al2O3-ZrO2 Nanoeutectic Ceramics by a Novel Pulse Discharge Plasma Assisted Melting Method

Formation of eutectic microstructure in Al2O3-GdAlO3-ZrO2 ceramics by flash sintering

The Microstructure Evolution and Mechanical Properties of Al2O3/ZrO2 Coatings with Different ZrO2 Contents: Guidelines to Prepare Eutectic Powders

Grain Size Dependence, Mechanical Properties and Surface Nanoeutectic Modification of Al2O3-ZrO2 Ceramic

Microstructural refinement and mechanical response of Al2O3–ZrO2 eutectics fabricated by a novel pulse discharge plasma assisted melting method

Microstructural formation and evolution of near-eutectic Al2O3–ZrO2 powders prepared by a rapid cooling technique: An exploration on coupled eutectic growth range

Fabrication of nanostructure Al2O3/ZrO2 (Y2O3) eutectic by combustion synthesis melt-casting under ultra-high gravity

Preparation, Microstructure and Properties of Ternary Al2O3/YAG/ZrO2 Ceramics Hot Pressed with Eutectic Composition Powders

Structural and Mechanical Properties of Electrofused-Corundum–Zirconia-Dioxide Composite Material Modified with a Eutectic Additive in the Al2O3–MnO–TiO2 System

Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics

Synthesis, Densification and Characterization of Nanosized Oxide Ceramic Powders with Eutectic Compositions by Heating of Alcohol-Aqueous Salt Solutions

Microstructural Characterization of Nanostructured Al2O3-ZrO2 Eutectic Layer by Laser Rapid Solidification Method

Microstructure and Mechanical Properties of Ceramics Obtained from Chemically Co-Precipitated Al 2 O 3 -Gdalo 3 Nano-Powders with Eutectic Composition

Sintering and Crystallization of Al2O3-La2O3-ZrO2 Eutectic Glass

Microstructure and High Temperature Deformation Behavior of the Mo-ZrO 2 Alloys

High Temperature Deformation of Non-Directionally Solidified Al2O3/YAG/ZrO2 Eutectic Bulk Ceramic