Abstract:With the rapid pace of socioeconomic progress, there has been a continuous rise in the generation of municipal solid waste incineration (MSWI) fly ash. Enhancing the efficiency of MSWI fly ash utilization, minimizing expenses, and developing more cost-effective and environmentally sustainable cementitious materials represent critical scientific challenges that warrant immediate attention. The research commenced with the preliminary treatment of MSWI fly ash using a blend of chemical activators and a water rinsing method. Following this, quicklime and coal fly ash were incorporated to formulate a geopolymer derived from MSWI, aimed at stabilizing the MSWI fly ash. Throughout this investigation, a selection of five chemical activators—calcium hydroxide, sodium hydroxide, sodium silicate, dilute sulfuric acid, and citric acid—was employed in conjunction with a water-washing procedure to condition the MSWI fly ash. Three single factor experiments denoted A, B, and C, were designed, and the corresponding geopolymer samples were prepared. In this research, the analysis focused on the solidified MSWI fly ash-based geopolymer samples, examining their physical and chemical characteristics, compressive strength, levels of heavy metal release, and the structure at a microscopic level. The findings revealed that the B3 series exhibited the most substantial 28-day compressive strength, reaching 1.692 MPa. Concurrently, the concentrations of leached heavy metals, including zinc (Zn), copper (Cu), chromium (Cr), lead (Pb), cadmium (Cd), and nickel (Ni), were all beneath the regulatory thresholds stipulated by the GB16889 and GB18598 criteria, signifying a notably effective solidification outcome. During the geopolymerization process, gel phases such as calcium aluminosilicate hydrate (C-A-S-H) and calcium silicate hydrate (C-S-H) are formed within the geopolymer matrix. This leads to the formation of a compact and cohesive cementitious material, which showcases superior mechanical strength and a robust capacity for heavy metal sequestration. This research contributes to the safe management of MSWI fly ash by not only facilitating its non-hazardous disposal but also enabling the efficient containment and elimination of heavy metals, chloride ions, and elemental aluminum.

Utilization of Fly Ash to Enhance Ground Waste Concrete-Based Geopolymer

Compressive strength of fly ash based geopolymer utilizing waste completely decomposed granite

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Synthesis Of Fly Ash/Metakaolin Geopolymer For Concrete Retrofitting Application

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Synthesis of High Strength Ambient Cured Geopolymer Composite by Using Low Calcium Fly Ash

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

The effect of different types of class F fly ashes on the mechanical properties of geopolymers cured at ambient environment

Experimental Study of the Geopolymeric Recycled Aggregate Concrete

Synthesis and Characterization of Metakaolin Modified Waste Concrete-Based Geopolymer

Lead-Zinc Mine Tailings Valorization Through Fly Ash-Based Geopolymer for Building Material: Synthesis, Microstructure, and Mechanical Properties

Utilization of Municipal Solid Waste Incineration Fly Ash As Construction Materials Based on Geopolymerization

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Enhanced geopolymerization of MSWI fly ash through combined activator pretreatment: A sustainable approach to heavy metal encapsulation and resource recovery

Realization of high-percentage addition of fly ash in the materials for the preparation of geopolymer derived from acid-activated metakaolin

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Study on Mechanical Properties and Microstructure of Fly-Ash-Based Geopolymer Solidified Waste Mud

Experimental Study on Characteristics of Fly Ash–GGBS-Based Geopolymer Concrete with Demolition Waste as Fine Aggregate

Impact of Micro Characteristics on the Formation of High-Strength Class F Fly Ash-Based Geopolymers Cured at Ambient Conditions

Waste Valorization: Sustainable Geopolymer Production Using Recycled Glass and Fly Ash at Ambient Temperature

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals