Abstract:Metal/composite hybrid structures, which combine low-density composites with low-cost metallic materials, exhibit considerable potential to provide cost-effective energy-absorbing devices for automotive applications. This study aimed to explore crashworthiness characteristics of aluminum/carbon fiber reinforced plastic (CFRP) hybrid tubes, experimentally and numerically, subjected to three different loading angles by comparing with the aluminum alone and CFRP alone tubes, in which the deformation patterns and several key indicators related to the crashworthiness of these structures were assessed. The experiments revealed that the CFRP tube has the highest SEA under the axial (37.82 J/g) and 15° loading (30.03 J/g) angles of all the configurations concerned; while the hybrid tube showed the greatest energy absorption. It was found that the energy absorption capacity of all specimens reduced in different extent with increasing loading angle. Specifically, with the loading angle up to 15°, SEA of the hybrid tube decreased by 10.0% from that with the axial loading; whereas SEA of the CFRP tube decreased by 20.6% from that of the axial loading. It means that the hybrid tube was more capable to mitigate the effects of oblique load on energy absorption capacity in comparison with the net CFRP tube. To better understand the crashing mechanism, numerical models were created and validated by the experimental data. A parametric study was further performed to investigate the effects of loading angle, thickness of aluminum layer, stacking sequence and thickness of CFRP layers on crashworthiness of these structures. It was found that the number of CFRP layers is more important to energy absorption of the hybrid tube. For the pure CFRP tube, there is significant difference between the axial and oblique loading conditions, making it disadvantageous to be a proper crashworthy structure. Whereas for the hybrid tube, the effect of loading angle on energy absorption capacity is considerably mitigated; and consequently, the hybrid configuration offers a higher energy absorption capacity for meeting the crashworthiness requirements accommodating complex impacting angles.

Energy absorption performance of thin-walled metal plate due to upheaval deformation based on experiments and numerical simulation

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

Investigation and optimization of energy absorption of squared-section thin-walled structure under lateral dynamic loading

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Crashworthiness analysis of shrink circular tube energy absorbers with anti-climbers under multiple loading cases

Numerical and experimental study on the design strategy of a new collapse zone structure for railway vehicles

Mechanisms of Diverting Out-of-plane Impact to Transverse Response in Plate Structures

Investigating the crash-box-structure's ability to absorb energy

Energy Absorption Characteristics and Parameter Optimization of Anti-Climb Energy-Absorbing Devices for Subway Vehicles under Impact Loads

Study on energy absorption capacity of thin-walled structures with variable cross-section shapes

Design, simulation and experiment study of a snap-fit spatial self-locking system for energy absorption

Experimental and numerical study on the lightweight design of load-bearing energy absorption structure for subway train

Machine learning-based crashworthiness optimization for the square cone energy-absorbing structure of the subway vehicle

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Study of the factors influencing load displacement curve of energy absorbing device by area division simulation

Dynamic response characteristics of an E-type impact isolation structure with a free mass constraint

On the crashworthiness of thin-walled multi-cell structures and materials: State of the art and prospects

Energy absorption characteristics of a novel hierarchical cross tube under axial impact loading

Research on energy absorption characteristics of biconical snap-fit spatial self-locking thin-walled structure

Experimental and theoretical study on an innovative energy absorption structure comprised of composite materials with necked‐down section subject to axial compressive load

On crashworthiness behaviors of 3D printed multi-cell filled thin-walled structures