Abstract:Thin-walled structures are widely used as typical high-efficiency energy-absorbing structures in crash safety protection. This paper aims to combine the characteristic of the square tube which concentrates energy dissipation through angle elements with the stable fold deformation of the circular tube, and innovatively propose a special-shaped thin-walled tube that contains both angle elements and arc elements. The failure behavior and energy absorption characteristics of the special-shaped tube were investigated by compression test and numerical simulation. The simulation results showed that the special-shaped thin-walled tubes have a significant advantage in energy absorption, and the specific energy absorption of the special-shaped tubes is 31.57% and 75.2% higher than that of the equal-mass circular and square tubes, respectively. Next, through finite element analysis, the effects of various parameters and initial imperfections on the crashworthiness of the special-shaped tubes were compared. The results indicated that adjustments to geometrical parameters significantly impact the energy absorption properties and crushing behavior of thin-walled tubes. Moreover, the tube with induced circular holes exhibited an optimal deformation mode. Further, a multi-objective optimal design of the metal special-shaped tube was carried out to obtain the best parameter configuration of the metal special-shaped tube. Finally, the special-shaped structure was extended to CFRP/AL hybrid thin-walled tubes. The failure behavior and energy absorption enhancement mechanism of the hybrid special-shaped tubes were investigated with experiments, and the absorbed energy of the hybrid tube was about 20% higher than the sum of the absorbed energy of the single constituent tubes. The effect of the CFRP lay-up pattern on the crashworthiness of the hybrid tube was investigated by numerical simulation, and it was found that the energy absorption capacity of the hybrid tube could be improved by appropriately increasing the number of layers and the proportion of axial fibers.

Study on energy absorption capacity of thin-walled structures with variable cross-section shapes

Investigation and optimization of energy absorption of squared-section thin-walled structure under lateral dynamic loading

On the crashworthiness of thin-walled multi-cell structures and materials: State of the art and prospects

Energy absorption mechanism of axially-varying thickness (AVT) multicell thin-walled structures under out-of-plane loading

Research on energy absorption characteristics of biconical snap-fit spatial self-locking thin-walled structure

A novel design of thin-walled energy absorption structures with local surface nanocrystallization

Design of hierarchical multi-cell double circular tubes thin-walled structures for energy absorption

Simulation Analysis of Inner Force Characteristics of Car Body Thin-walled Beam Structures Subject to Lateral Impact

Energy absorption characteristics of a novel hierarchical cross tube under axial impact loading

Optimal Crashworthiness Design of a Spot-Welded Thin-Walled Hat Section

Energy Absorption Capability of Thin-Walled Structures with Various Cross Sections Under Oblique Crash

Energy absorption characteristics simulation of cone thinwalled metal tube research in the automotive collision

Bionic design and multi-objective optimization for variable wall thickness tube inspired bamboo structures

Energy-absorbing properties of thin-walled square tubes filled with hollow spheres

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Experiment Research on Axial Dynamic Buckling of Thin-Wall Cylindrical Shells Based on Finite Element Model

Impact resistance and energy absorption ability of bio-mimetic thin-walled structures with hollow columns under impact loading

Crashworthiness analysis and optimization design of special-shaped thin-walled tubes by experiments and numerical simulation

Multiple Performance Evaluation of Bionic Thin-Walled Structures with Different Cross Sections considering Complex Conditions

Crashworthiness performance of novel thin-walled tubes with spiral cross section

Review of Crashworthiness Studies on Cellular Structures