Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

On crashworthiness behaviors of 3D printed multi-cell filled thin-walled structures

A study of crashworthiness performance in thin‐walled multi‐cell tubes 3D‐printed from different polymers

Progressive Collapse Behaviors and Mechanisms of 3D Printed Thin-Walled Composite Structures under Multi-Conditional Loading

Integrated design and additive manufacturing of lattice-filled multi-cell tubes

Experimental and Numerical Investigation into Axial Compressive Behaviour of Thin-Walled Structures Filled with Foams and Composite Skeleton

Crushing responses and energy absorption behaviors of multi-cell CFRP tubes

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

On Multi-Stage Deformation and Gradual Energy Absorption of 3D Printed Multi-Cell Tubes with Varying Cross-Section

On Design of Multi-Cell Thin-Wall Structures for Crashworthiness

Crashworthiness of Circular Fiber Reinforced Plastic Tubes Filled with Composite Skeletons/aluminum Foam under Drop-Weight Impact Loading

Crushing and Theoretical Analysis of Multi-Cell Tube Filled with Auxetic Structure under Axial Impact Loading

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Discovering the Impact of Printing Parameters on the Crashworthiness Performance of 3D-Printed Cellular Structures

On the crashworthiness of thin-walled multi-cell structures and materials: State of the art and prospects

Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes

Experimental and numerical studies on the bending collapse of multi-cell Aluminum/CFRP hybrid tubes

Deformation mode and energy absorption of self-assembly CFRP composites cellular structure by 3D printing

Low-velocity Impact Performance of Composite-Aluminum Tubes Prepared by Mesoscopic Hybridization

Crashworthiness Design of Self-Similar Graded Honeycomb-Filled Composite Circular Structures

Compression behavior and energy absorption of 3D printed continuous fiber reinforced composite honeycomb structures with shape memory effects