Abstract:Benefiting from the high critical current density (Jc), single-grain (RE)BCO (where RE = rare earth or Gd) bulks are capable of trapping over 17.6 T magnetic field which is crucial for the application of bulk superconductors. Nevertheless, during field cooling magnetization (FCM), the large mechanical stress induced by Lorentz forces may lead to fracture behavior in the brittle ceramic nature of (RE)BCO materials. Most previous numerical models that adopted simplified homogeneous Jc had difficulty reflecting the real stress/strain situation in high temperature superconductor (HTS) bulks. Based on the proposed modified Jirsa model considering r-z plane Jc inhomogeneity, we investigate the mechanical response of GdBCO bulks manufactured by top-seeded melt growth (TSMG) process. A 2D axisymmetric electromagnetic-thermal-mechanical coupled model is implemented to take into account the dependence of Jc upon mechanical deformation. The simulation results show the electromagnetic-thermal-mechanical response of the r-z plane inhomogeneous Jc model is significantly lower than that obtained by the homogeneous Jc model. This confirms Takahashi's speculation (K Takahashi 2019 Supercond. Sci. Technol. 32 015007) about the mismatch between experimental data and the simulation results of homogeneous Jc model, and suggests the stress levels in the bottom plane of HTS bulk are overestimated by the previous homogeneous Jc model. On top of that, the overall stress level of GdBCO bulk is strongly determined by the magnitude and position of the Lorentz force load, and the stress distribution of inhomogeneous Jc model is mainly concentrated in high Jc regions near top surface, instead of being symmetrically distributed along the z-axis as in homogeneous Jc model. The mechanical response of stainless steel reinforced GdBCO bulk under two different constraint conditions was analyzed and compared. Finally, the coupling effect between the fracture strength variability caused by defects and cracks and the trapped field in GdBCO bulks with r-z plane Jc inhomogeneity is further studied. This study may provide a relatively realistic mechanical response of HTS bulk during FCM, and a novel design consideration for its mechanical reinforcement.

An Equivalent Homogenized Model for Non-Superconducting Joints Made by ReBCO Coated Conductors

Numerical Study on Simplified Resistive Joints of Coated Conductors: is There a Lower Limit of the Joint Resistance?

Numerical Study on Silver Diffusion Joints of Coated Conductors by Finite-Element Method

Numerical Study on Mechanical Behavior and Electromechanical Properties of Solder-Jointed REBCO-Coated Conductors

Three-dimensional simulation of single-lap and bridge joints of coated conductor under tension and bending tests

Development of Electromagnetic Forming Nbti Superconducting Joint

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

Investigation of Orthogonal Experiment for Fabrication of A Soldering Joint for A 4-T Hts Coil

Design and optimization of low-resistance YBCO superconducting joint

Numerical Simulation of NbTi Superconducting Joint with Cold-Pressing Welding Technology

Systematic Investigation of a NbTi-Bi2223 Hybrid Low-Resistive Joint

Development of persistent joints for superconducting Bi-2212 coils

Fabrication and Performance of Nb3Sn Superconducting Joints

A modified J model for efficiently calculating the electromagnetic fields of ReBCO no-insulation pancake coils using an explicit-implicit hybrid algorithm

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

R-z plane spatial critical current inhomogeneity-induced mechanical response of GdBCO superconducting bulks during field cooling magnetization

A Generalized Model of HTS-HTS Joint Resistance for Superconducting Magnets

Modeling of contact resistivity and simplification of 3D homogenization strategy for the H formulation

Numerical calculations of high temperature superconductors with the J-A formulation

Experimental Investigation on Constitutive Behaviour of Superconducting Powder BSCCO