Abstract:In this paper, we present an investigation of ultrasonic welding performance for 25 mm 2 copper wire and T2 copper plate across various welding parameters using orthogonal experimentation. The objective of this work was to explore the influence of operational parameters on the resulting welds. A comprehensive study of the mechanical properties and microstructure of the copper wire-to-copper plate joint was carried out using a series of sophisticated instruments. It includes a universal tensile machine, resistance measuring equipment, SEM, EDS and temperature measuring tool. This multifaceted approach enabled a detailed analysis of the joint's integral features and properties. This provides further insight into its performance and durability. Findings indicate that welding pressure has the most significant effect on welded joints. The optimal combination of parameters is achieved with the welding energy set at 6000 J, the welding amplitude at 85% and the welding pressure at 260 kPa. In different sets of welding parameters, joint strength is positively related to welding parameters and increases with increasing welding parameters. Joint resistance decreases with increasing joint tensile load and conductivity can be used to evaluate ultrasonic welding. It has been found that the development of the welded joint is achieved gradually in a direction moving inwards from the welding tool head, exhibiting a methodical forming process. Three distinct failure modes are observed in welded joints such as joint pullout, joint tearing and busbar breakage. The peak temperature during the welding process was recorded at 373 °C which indicates that the ultrasonic welding is a solid state connection.

Investigation of Orthogonal Experiment for Fabrication of A Soldering Joint for A 4-T Hts Coil

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Development of Electromagnetic Forming Nbti Superconducting Joint

An Equivalent Homogenized Model for Non-Superconducting Joints Made by ReBCO Coated Conductors

A Novel Low-Resistance Solder-Free Copper Bonding Joint Using a Warm Pressure Welding Method for REBCO Coated Conductors

Design and optimization of low-resistance YBCO superconducting joint

Numerical Study on Mechanical Behavior and Electromechanical Properties of Solder-Jointed REBCO-Coated Conductors

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

Fabrication of NbTi Superconducting Joints for 400-Mhz NMR Application

Three-dimensional simulation of single-lap and bridge joints of coated conductor under tension and bending tests

Development of persistent joints for superconducting Bi-2212 coils

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

The low temperature test study for the electrical properties of second generation YBCO strip

Numerical Simulation of NbTi Superconducting Joint with Cold-Pressing Welding Technology

Optimisation of the processing parameters for the fabrication of high-quality joints between Y-Ba-Cu-O single grain, bulk superconductors

Experiment of Joints Resistance and Critical Current of Bi2212 Conductor

Systematic Investigation of a NbTi-Bi2223 Hybrid Low-Resistive Joint

Fabrication and Performance of Nb3Sn Superconducting Joints

Microstructural and Mechanical Characteristics Examination of Ultrasonically Welded Joints Using Orthogonal Experimentation

Experimental Investigation on Constitutive Behaviour of Superconducting Powder BSCCO

A Novel Nb Superconducting Joint with Ultralow Resistance Fabricated by Electron Beam Welding Method for Superconducting Gravimeter