Abstract:With the development of aerospace and fusion engineering, understanding the mechanical behavior of materials under high-temperature conditions has become increasingly important. However, few studies are devoted to the ultra-high temperature range of 2000-3000 degrees C. In this study, with the aim of developing non-contact measuring techniques of mechanical deformation under ultra-high temperature, a high heat flux (similar to 300 MW) comprehensive experimental platform is established, which includes a vacuum chamber, a three-dimensional digital image correlation (3D-DIC) system, infrared radiation thermometers and an electron beam heating system. Using the electron beam heating technique, the tungsten specimen can be heated to over 3000 degrees C. Owing to the use of a vacuum chamber, the thermally induced airflow disturbance at high temperature can be completely removed. Tantalum carbide (TaC) powder is chosen as the speckle material and speckle fabrication technology is developed to adapt ultra-high temperatures under vacuum conditions. In order to suppress the blackbody radiation at high temperature, three schemes based on blue light sources, self-radiating light sources and a dual wavelength optical filter technique are designed for three temperature ranges from room temperature to 3067 degrees C. Afterwards, full-field thermal deformation of the tungsten specimen above 3000 degrees C was determined based on the above strategies using the 3D-DIC technique. The feasibility and accuracy of the proposed methods are verified by comparing the measurement results with the thermal expansion strain data and model from available databases and literature. The standard deviations in different temperature intervals are 50 mu epsilon for 25-1200 degrees C, 100-200 mu epsilon for 1200-1800 degrees C and less than 500 mu epsilon for 1800-3067 degrees C. The proposed methods and technologies are expected to lay a foundation for further developments in strain field measurements at ultra-high temperature.

Experimental Study of Ultra-High Temperature Interlaminar Tensile Strengths of 3D-Needled C/C Composites Using the V-shaped Notched Specimen Compression Method

Compressive experimental method and properties of C/C composites under ultra-high temperature environment

Modified Double-Notched Specimen for Ultra-High Temperatures Shear-Strength Testing of Carbon/carbon Composites

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

MEASUREMENT AND PREDICTION OF THE TENSILE PROPERTIES FOR 3D C/C COMPOSITE AT HIGH TEMPERATURE

High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 °C

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 2300 °C

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

High-temperature tensile behavior of 3D SiC/SiC composites

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

Comparison on failure behavior of three-dimensional woven carbon/carbon composites joints subjected to out-of-plane loading at room and high temperature

A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading

The Effect of Fiber Preform Configuration on In-Plane Compressive Behavior of High Porosity Needled Carbon/carbon Composites in Elevated Temperature Environment

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Mechanical Properties and Failure Mechanisms at High Temperature in Carbon Nanotube Reinforced Copper Matrix Nanolaminated Composite

Experimental investigation of temperature effects on the tensile behavior of composite‐aluminum four‐nail bolted joints

Strain Rate Effect on Mechanical Properties of 3D Needle-Punched C/C Composites at Different Temperatures

Strain Field Measurements over 3000 °C Using 3D-Digital Image Correlation

Mechanical Behavior of carbon felt-carbon composites under ultra-high temperature

Test and simulation of high temperature resistant polyamide composite with single lap single bolt connection