Abstract:Monolithic macroporous zirconia was synthesized through a new method involving an epoxide-driven sol–gel method accompanied by a spontaneous phase separation. The sol–gel transition utilized inorganic salt ZrCl4 as primary precursor and propylene oxide as matrix former through a ring-opening reaction. Phase separation was induced with poly-(ethylene oxide) (PEO) and its tendency was adjusted by incorporating Mg2+/Y3+ and N-methylformamide (NFA) in starting solution. The morphology of the dried gel changed from a solid nanoporous structure through a phase separated macroporous bicontinuous structure to aggregates particles when varying Mg2+ or Y3+, NFA and PEO composition. An appropriate choice of the starting composition, by which the phase separation and gelation occurred parallel, allows the fabrication of macroporous zirconia monoliths in large dimensions (Φ = 30 mm, h = 8 mm). The skeleton of the monolithic macroporous zirconia gels possess a BET surface area of 271.7 m2/g. Accordingly, the effect and mechanisms of Mg2+, Y3+ and NFA during gelation process were proposed in detail. Moreover, Mg2+ or Y3+ might also act as stabilizer to form the magnesia or yttria stabilized tetragonal or cubic zirconia after the samples were heat-treated at high temperature (800 °C).

Preparation of ZrC/SiC Porous Self-Supporting Monoliths Via Sol-Gel Process Using Polyethylene Glycol As Phase Separation Inducer

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Preparation of Highly Porous ZrB2/ZrC/SiC Composite Monoliths Using Liquid Precursors Via Direct Drying Process

Preparation of Macroporous Zirconia Monoliths via Sol-Gel Process Accompanied by Phase Separation

Preparation of Li-doped ZrO2 Porous Monoliths via Sol-Gel Process Accompanied by Phase Separation

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

Preparation of Hierarchical Porous Silicon Carbide Monoliths via Ambient Pressure Drying Sol–Gel Process Followed by High-Temperature Pyrolysis

Preparation of macroporous Li2ZrO3 monoliths via an epoxide-mediated sol–gel process accompanied by phase separation

Macroporous Sio2 Monoliths Prepared Via Sol-Gel Process Accompanied by Phase Separation

Preparation of Mullite Monoliths with Well-Defined Macropores and Mesostructured Skeletons Via the Sol–gel Process Accompanied by Phase Separation

Preparation of Porous ZnAl2O4 Spinel Monoliths Through Sol-Gel Route Accompanied with Phase Separation

Preparation of Porous YSZ Monoliths via Sol-gel Process Accompanied by Phase Separation

Sol–gel Synthesis of Macroporous Barium Zirconate Monoliths from Ionic Precursors Via a Phase Separation Route

In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: Processing, microstructure, mechanical properties and oxidation behavior

Preparation of Interconnected Porous Carbon Monoliths by Reaction-Induced Phase Separation and Pyrolysis

Macroporous MgO Monoliths Prepared by Sol–gel Process with Phase Separation

Preparation and Mechanism of Interconnected Mesoporous Carbon Monoliths from Phenolic Resin/Ethylene Glycol Mixtures

Tough Monolithic TiO2 Materials Fabricated by the Sol-Gel Process Accompanied with Phase Separation in Solutions of SiC Nanofibers and Preceramic Polymers

Preparation of Macroporous Transition Metal Hydroxide Monoliths Via a Sol-Gel Process Accompanied by Phase Separation

Preparation of Macroprous C12A7 Mayenite Monoliths Via a Sol-Gel Process with Nitrates As Precursors

Preparation and Characterization of Macroporous Mayenite Monoliths