Abstract:Outstanding mechanical properties of graphene tend to deteriorate as its size increases as a consequence of agglomeration in metal matrix composites. In the present work, a post-process designing technique based on surface modification method is proposed which incorporates micro-level properties of graphene in order to realize its high theoretical strength and stiffness to improve mechanical properties of existing metal/alloy/metal matrix composite structures, hence enhancing their stiffness-to-weight ratio. The design utilizes laser surface texturing (LST) technique to fabricate micro-sized dimples on each surface and interface of plate structures. Graphene nanoplatelets (GNPs) are confined within these micro-dimples to form a graphene-based metal matrix composite. For numerical analysis under static loading and boundary conditions, two novel models are proposed, with different texture depths formed on each of five metal (Ti, Al, Cu, Ni and Mg) plate substrates. The elastic properties of both composite models have been modeled by employing Halpin–Tsai micromechanics framework. The linear 3D theory of elasticity is used as the basis of forming governing differential equations, and they are solved using scaled boundary finite element method (SBFEM). Stress and strain behaviors for all the models as well as substrate plates are discussed in detail, and obtained results in present study are consistent with already available analytical results. Furthermore, a remarkable enhancement in specific-stiffness is seen for proposed models as compared to the pure metal counterparts. The percentage decrement of maximum in-plane strain between pure Mg plate and Mg + GNPs (3.92 vol%) plate is 41.22%, and that between pure Ni plate and Ni + GNPs (3.92 vol%) plate is 7.40%. For both the models, about 97.94% of the top and bottom surface areas are covered with graphene making the composites highly corrosion resistant.

Preparation and Mechanical Performance of Graphene Platelet Reinforced Titanium Nanocomposites for High Temperature Applications

Mechanical and tribological properties of graphene nanoplatelets-reinforced titanium composites fabricated by powder metallurgy

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

PREPARATION AND PROPERTIES OF TiB2/TiAl COMPOSITE SHEETS WITH LAYERED STRUCTURE

Tribological Behavior Of Graphene Reinforced 600 Degrees C High Temperature Titanium Alloy Matrix Composite

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

Investigation of graphene nanoplatelets-deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach

Mechanical Properties of TC11 Titanium Alloy and Graphene Nanoplatelets/TC11 Composites Prepared by Selective Laser Melting

Effect of sintering temperature on microstructure and properties of graphene nanoplatelets reinforced TC21 composites prepared by spark plasma sintering

Effects of Graphene Nanoplatelets on the Microstructure, Mechanical Properties, and Corrosion Behavior of Spark Plasma Sintered Al + 20 vol.% (TiC + TiB2) Hybrid Composites

Microstructures and properties of graphene nanoplatelets reinforced Cu/Ti3SiC2/C nanocomposites with efficient dispersion and strengthening achieved by high-pressure torsion

Achieving high strength and superior wear‐resistant properties in TiH2 matrix reinforced with graphene nanoplates

Study on the Microstructure and Properties of Graphene Powder-Reinforced Ti-Al Metal-Intermetallic Laminated Composite

Enhanced mechanical and tribological properties of graphene nanoplates reinforced TC21 composites using spark plasma sintering

Investigation of microstructure and tribological performances of high-fraction TiC/graphene reinforced self-lubricating Al matrix composites

Microstructure and Tensile Properties of Graphene-Oxide-Reinforced High-Temperature Titanium-Alloy-Matrix Composites.

Simultaneously improving mechanical, thermal, and anti-wear properties of Ti alloys using 3D-networked graphene as reinforcement

Selective laser melting of graphene reinforced titanium matrix composites: Powder preparation and its formability

Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio

Graphene-TiC hybrid reinforced titanium matrix composites with 3D network architecture: Fabrication, microstructure and mechanical properties

Micromechanical and tribological behavior of titanium matrix composites reinforced with graphene oxide