Abstract:Outstanding mechanical properties of graphene tend to deteriorate as its size increases as a consequence of agglomeration in metal matrix composites. In the present work, a post-process designing technique based on surface modification method is proposed which incorporates micro-level properties of graphene in order to realize its high theoretical strength and stiffness to improve mechanical properties of existing metal/alloy/metal matrix composite structures, hence enhancing their stiffness-to-weight ratio. The design utilizes laser surface texturing (LST) technique to fabricate micro-sized dimples on each surface and interface of plate structures. Graphene nanoplatelets (GNPs) are confined within these micro-dimples to form a graphene-based metal matrix composite. For numerical analysis under static loading and boundary conditions, two novel models are proposed, with different texture depths formed on each of five metal (Ti, Al, Cu, Ni and Mg) plate substrates. The elastic properties of both composite models have been modeled by employing Halpin–Tsai micromechanics framework. The linear 3D theory of elasticity is used as the basis of forming governing differential equations, and they are solved using scaled boundary finite element method (SBFEM). Stress and strain behaviors for all the models as well as substrate plates are discussed in detail, and obtained results in present study are consistent with already available analytical results. Furthermore, a remarkable enhancement in specific-stiffness is seen for proposed models as compared to the pure metal counterparts. The percentage decrement of maximum in-plane strain between pure Mg plate and Mg + GNPs (3.92 vol%) plate is 41.22%, and that between pure Ni plate and Ni + GNPs (3.92 vol%) plate is 7.40%. For both the models, about 97.94% of the top and bottom surface areas are covered with graphene making the composites highly corrosion resistant.

Effects of Graphene Nanoplatelets on the Microstructure, Mechanical Properties, and Corrosion Behavior of Spark Plasma Sintered Al + 20 vol.% (TiC + TiB2) Hybrid Composites

Effect of sintering temperature on microstructure and properties of graphene nanoplatelets reinforced TC21 composites prepared by spark plasma sintering

Enhanced mechanical and tribological properties of graphene nanoplates reinforced TC21 composites using spark plasma sintering

Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio

Investigation of graphene nanoplatelets-deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach

Effects of mixing methods on the interface and microstructure evolution of graphene platelets/Ti-6Al-4V powder composites fabricated by powder metallurgy and extrusion

An Investigation on the Sinterability and the Compaction Behavior of Aluminum/Graphene Nanoplatelets (GNPs) Prepared by Powder Metallurgy

Investigation of microstructure and tribological performances of high-fraction TiC/graphene reinforced self-lubricating Al matrix composites

The effect of sintering temperature and time on microstructure, hardness and wear behaviors of Al 99.9/GNP composites

Effect of Graphene on the Microstructure Evolution and Mechanical Properties of Al–10Si–2Cu–1.5Fe Aluminum Matrix Composites

Microstructure and Mechanical Properties of Spark Plasma-Sintered Graphene-Reinforced Inconel 738 Low Carbon Superalloy

Microstructure, Mechanical, Tribological and Synergistic strengthening mechanisms of nickel/graphene nanoplatelets hybrid reinforced AZ91D magnesium-based matrix composites via spark plasma sintering

Mechanical and tribological properties of graphene nanoplatelets-reinforced titanium composites fabricated by powder metallurgy

Corrosion Behavior of Microwave-Sintered Ti6Al6V2Sn Reinforced with Graphene Nanoparticles

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

Synthesis and characterization of graphene nanoplatelets reinforced AA7068 matrix nanocomposites produced by liquid metallurgy route

Microstructure, mechanical and thermal properties of ultrafine-grained Al2024–TiC-GNPs nanocomposite

Effect of Carbide Interlayers on the Microstructure and Properties of Graphene-Nanoplatelet-reinforced Copper Matrix Composites

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates