Abstract:The objective of this study is to explore the feasibility of using ultrasonic pulse wave measurements as an early detection method for corrosion-induced concrete damages. A series of experiments are conducted using concrete cube specimens, at a size of 200 mm, with a reinforcing steel bar (rebar) embedded in the center. The main variables include the water-to-cement ratio of the concrete (0.4, 0.5, and 0.6), the diameter of the rebar (10 mm, 13 mm, 19 mm, and 22 mm), and the corrosion level (ranging from 0% to 20% depending on rebar diameter). The impressed current technique is used to accelerate corrosion of rebars in concrete immersed in a 3% NaCl solution. Ultrasonic pulse waves are collected from the concrete specimens using a pair of 50 kHz P-wave transducers in the through-transmission configuration before and after the accelerated corrosion test. Deep learning techniques, specifically three recurrent neural network (RNN) models (long short-term memory, gated recurrent unit, and bidirectional long short-term memory), are utilized to develop a classification model for early detection of concrete damage due to rebar corrosion. The performance of the RNN models is compared to conventional ultrasonic testing parameters, namely ultrasonic pulse velocity and signal consistency. The results demonstrate that the RNN method outperforms the other two methods. Among the RNN methods, the bidirectional long short-term memory RNN model had the best performance, achieving an accuracy of 74% and a Cohen's kappa coefficient of 0.48. This study establishes the potentiality of utilizing deep learning of ultrasonic pulse waves with RNN models for early detection of concrete damage associated with steel corrosion.

Measurement of Reinforcement Corrosion in Concrete Adopting Ultrasonic Tests and Artificial Neural Network

Point Cloud and Machine Learning-Based Automated Recognition and Measurement of Corrugated Pipes and Rebars for Large Precast Concrete Beams

Ultrasonic Array Tomography-Oriented Subsurface Crack Recognition and Cross-Section Image Reconstruction of Reinforced Concrete Structure Using Deep Neural Networks

Study on the Real-Time Dynamic Monitoring of Corrosion Rate of Reinforcement in Carbonation Environment

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Evaluation of Early Concrete Damage Caused by Chloride-Induced Steel Corrosion Using a Deep Learning Approach Based on RNN for Ultrasonic Pulse Waves

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Combined Application of Novel Electromagnetic Sensors and Acoustic Emission Apparatus to Monitor Corrosion Process of Reinforced Bars in Concrete

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

Reinforcement Corrosion-Induced Cover Cracking and Its Time Prediction for Reinforced Concrete Structures

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Using artificial neural network and non‐destructive test for crack detection in concrete surrounding the embedded steel reinforcement

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Stochastic Characteristics of Reinforcement Corrosion in Concrete Beams under Sustained Loads

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Numerical-based method for calculating reinforcement corrosion at concrete cover cracking due to corrosion

Mechanical Performance of Corroded Steel Bars in Concrete

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Study On Relationship Between Pore Structure And Strength Of Concrete Based On Artificial Neural Networks