Abstract:High sensitivity to crack and damage of chemical vapor-deposited silicon carbide (CVD- SiC) restricts the high-efficiency and low-damage manufacturing of CVD-SiC components. This paper aims to reveal the damage and material removal mechanisms of CVD-SiC after being scratched by diamond abrasives. The mechanical properties, scratching force, depth of ductile-brittle transition, residual depth and material removal damages of the CVD-SiC were discussed by the indentation, nano-scratching experiments, and compared with sintered silicon carbide (SSiC) ceramics. The results demonstrated that the mechanical properties of CVD-SiC are better than SSiC. In terms of hardness and fracture toughness, CVD-SiC demonstrates a 10– 20% and 20– 30% higher level of performance than SSiC, respectively. SSiC exhibits a brittleness level approximately 30% higher than that of CVD-SiC. SSiC ceramics are prone to crack deflection, intergranular fracture and transgranular fracture during indentation, indicating a higher propensity for brittle fracture in SSiC. The crack propagation in CVD-SiC is relatively regular. Both materials undergo the ductile, ductile-brittle transition and brittle stage, and the fluctuation variability of CVD-SiC material is notably lower than that of SSiC during the brittle stage. Compared with SSiC, the residual depth, groove width and transverse force of CVD-SiC are smaller under the same normal load. The critical depth of ductile-brittle transition of CVD-SiC is about 2 times that of SSiC in experimental and theoretical, indicating that CVD-SiC easily achieves ductile grinding. The mechanical properties, crack system and crystal structure of the CVD-SiC and SSiC materials cause the divergences in brittle removal. The radial-median crack system dominates the material removal of CVD-SiC. The disparity of deformations on the inside and outside of the crystal in the brittle stage leads to significant fluctuation variability of force and depth of SSiC during the scratching.

Quantitative Characterization of Nanoindentation Properties of CVI Gradient SiC Ceramic into CNT Arrays

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Anisotropic tensile mechanics of vertically aligned carbon nanotube reinforced silicon carbide ceramic nanocomposites

On understanding the mechanical properties and damage behavior of C f /SiC composites by indentation method

Nano-Indentation Properties of Tungsten Carbide-Cobalt Composites as a Function of Tungsten Carbide Crystal Orientation

Effect of CVI SiC interphase on tensile properties of SiC fibers with different surfaces

Role of V(C, N) on gradient structure formation and mechanical properties of nanocrystalline cemented carbides

Damage characteristics and material removal mechanisms of CVD-SiC in nanotests: A comparative with sintered SiC

Study on Microstructures of 2D and 3D Chemical Vapor Infiltration SiC/SiC Composites

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Densified Vertically-Aligned Carbon Nanotube Arrays by Chemical Vapor Infiltration

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Microstructure and properties of CNTs reinforced CVI-pyrocarbon matrix

Study on Mechanical Properties of Single-Crystal Silicon Carbide by Nanoindentation

Electrical conductivity and infrared radiation performance of SiC-CNT composite ceramics

Growth of carbon nanotubes on silicon carbide fabric as reinforcement for SiC/C composites

Depth-sensing ductile and brittle deformation in 3C-SiC under Berkovich nanoindentation

Atomic study on deformation behavior and anisotropy effect of 4C–SiC during nanoindentation