Abstract:Partial discharge (PD) is a common phenomenon in high voltage (HV) equipment, which will radiate light signals outward in the process of discharge, by detecting this optical signal, we can judge whether the HV equipment have PDs or not, the conventional detection methods under impulse voltage are very complex due to the interference of electromagnetic (EM) wave, but optical method does not have this problem. Fluorescent optical fiber is not affected by numerical aperture problem, so the sensitivity of fluorescent optical fiber sensor is much higher than that of traditional quartz optical fiber sensor. In this work, the fluorescent optical fiber sensor was manufactured and applied to the PD detection in gas insulated switch (GIS) and transformer, fluorescent optical fiber was used as a probe, which was connected with the transmission optical fiber by coupler, and the photomultiplier tube was used to convert the optical signal into electrical signal for displaying by oscilloscope. The discharge signal can be detected by the sensor when the impulse voltage was applied to the GIS and transformer, and it was less affected by the interference of EM wave signals. As the PD source at different positions in GIS, we found that the optical signal attenuates greatly when the optical was blocked by some internal structures, and the attenuation was increase with the increase of distance between PD source and the sensor. The optical signals of PDs can also be detected by the sensor in the transformer, but the attenuation of the optical signal in the transformer was greater than that in GIS, it was greatly affected by the blocking of windings. The two experiments were verified in the TracePro simulation software, and the average deviations between results of experiments and simulations were less than 10%.

Optical Partial Discharge Diagnosis in SF6 Gas-Insulated System with SiPM-Based Sensor Array

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Towards Optical Partial Discharge Detection with Micro Silicon Photomultipliers

Application of a Partial Discharge Diagnosis Method Based on the Novel Multispectral Array Sensor and GMM in Different Insulating Gases

Optical Characteristics and Fault Diagnosis of Partial Discharge in C4F7N/CO2 Gas Mixture and SF6 Based on Novel Multispectral Microarray Detection

Partial Discharge Detection Technology for Switchgear Based on Near-Field Detection

Passive Wireless Partial Discharge Sensors with Multiple Resonances

Examination and Research on the Partial Discharge Fault Diagnostics in Gas Insulated Switchgear

Simulation Study on Propagation Characteristics of Optical Signal of Different Partial Discharge Defects

Partial Discharge Ultrasonic Detection Based on Sagnac Optical Interference Technique

Partial discharge detection on power equipment using a magneto-resistive sensor

Diagnosis of Partial Discharge Based on the Air Components for the 10 kV Air-Insulated Switchgear

A Denoising Method for Partial Discharge Ultrasonic Signals in GIS Based on Ultra-High Frequency Signal Synchronization

Investigation of the Evaluation of the Pd Severity and Verification of the Sensitivity of Partial-Discharge Detection Using the Uhf Method in Gis

Finding Ways to Effectively Use Year 12 Achievement Data to Inform Practice in Secondary Schools.

Detection of Partial Discharge in GIS and Transformer Under Impulse Voltage by Fluorescent Optical Fiber Sensor

Fiber Optic MEMS Ultrasonic Sensor and its Application in Partial Discharge Detection

Diagnosis of Partial Discharge in GIS Based on UHF Sensing Technique

Relationship Between Time-Frequency Representation of PD-induced UHF Signal and PD Current Pulse

Partial Discharge Diagnostics: Data Cleaning and Feature Extraction

Diagnosis of Insulation Condition of MV Switchgears by Application of Different Partial Discharge Measuring Methods and Sensors