Abstract:In view of the fact that the partial discharge (PD) signal energy is mainly concentrated below hundreds of megahertz, the ultra-high frequency part of the energy is weak, and the interior space of the switchgear is narrow, this paper proposes a new method for PD detection of the switchgear based on near-field detection. Firstly, based on the principle of PD, the field characteristics of the signal in the switchgear are analyzed. After that, the probe is designed with an electric small loop structure. Based on its equivalent circuit, its measurement principle and amplitude frequency characteristics are analyzed. The influence of probe size and material on amplitude frequency characteristics is obtained by using simulation software High Frequency Structure Simulator (HFSS), and the probe parameters suitable for PD detection in the switchgear are determined. Finally, the performance of the probe is measured by network analyzer, and the PD signal is tested on the simulated PD test platform. The results show that the probe works in the frequency band of 10–200 MHz and can receive PD signals containing more energy information. In the operating frequency band, the reflection coefficient of the probe port is very large, and its interference to the signal near field is particularly small. The probe also has good frequency response characteristics, and the fluctuation in the frequency band is less than 5 dB, which can obtain more accurate PD signal characteristics in subsequent processing. In addition, the probe is passive, with dimensions of 166 mm in length, 104 mm in width, and 2 mm in thickness, which is suitable for placing in the switchgear with small internal space. The results of PD receiving test show that the probe can reflect the occurrence of PD remarkably and accurately.

Partial Discharge Diagnostics: Data Cleaning and Feature Extraction

Discrimination of Three or More Partial Discharge Sources by Multi-Step Clustering of Cumulative Energy Features

Partial Discharge Pattern Recognition Based on 3D Graphs of Phase Resolved Pulse Sequence

Diagnosis of Partial Discharge Based on the Air Components for the 10 kV Air-Insulated Switchgear

Pattern Recognition of Partial Discharge Faults in Switchgear Using a Back Propagation Neural Network Optimized by an Improved Mantis Search Algorithm

Identification of Partial Discharge Sources by Feature Extraction from a Signal Conditioning System

Partial Discharge Recognition in Real Switchgear Based on Soft Scoring Mechanism and Multi-Mode Fusion

Recognition Of Partial Discharge Sources

Research on Partial Discharge Detection of Switchgear Based on Ultrasonic Signal Characteristic

Implementation of A Novel Double-Side Technique for Partial Discharge Detection and Location in Covered Conductor Overhead Distribution Networks

Online Monitoring of Partial Discharge in High Voltage Switchgear Using a Differential Electric Field Sensor

Adopting Integration of Multispectral Time Resolved Analysis and Graph-Based Deep Learning Method in Partial Discharge Type Identification

Separation and Classification of Concurrent Partial Discharge Signals Using Statistical-Based Feature Analysis

Partial Discharge Detection Technology for Switchgear Based on Near-Field Detection

Multispectral Optical Partial Discharge Detection, Recognition, and Assessment

Partial discharge theory and technologies related to medium-voltage electrical equipment

Partial Discharge Detection in Gas-Insulated Switchgears Using Sensors Integrated with UHF and Optical Sensing Methods

Segmented Spectrum Energy Characteristics-based Density Clustering of Partial Discharge Signals

Diagnosis of Insulation Condition of MV Switchgears by Application of Different Partial Discharge Measuring Methods and Sensors

Partial Discharge Monitoring on Metal-Enclosed Switchgear with Distributed Non-Contact Sensors.

Detection and Identification Techniques for Multi-PD Source in GIS