Abstract:A high energy monolithic all fiber chirped pulse amplification (CPA) system composed of fiber-silicate glass fiber is demonstrated in this work. In this compact system, the optical stretcher consists of two large dispersion chirped fiber Bragg gratings that offer a high stretch ratio to lower the nonlinearity that accumulates in the fiber amplifier. By employing high gain silicate glass fiber with a length of 20 cm as the main amplifier, an optimal balance of pulse energy and the B-integral is achieved. An amplified power of 42.6 W, corresponding to a pulse energy of 213 µJ, is obtained with an injection power of 100 mW. After compression, the laser pulses are compressed by a novel polarization-controlled double-pass configuration of a chirped volume Bragg grating (CVBG) to match the dispersion of the fiber stretcher. A total compression efficiency of 79.8% is obtained. The dispersion between the stretcher and the compressor is matched with the self-made temperature tuning device of the fiber grating. An optimized pulse width of 781 fs and a pulse energy of 170 µJ are obtained with the single-mode beam profile. To the best of our knowledge, this is the highest energy ever obtained with a single-mode beam profile for a spliced monolithic all-fiber CPA system. This compact high-energy fiber system will be useful in scientific research and industrial applications.

High Average Power Coherent Femtosecond Pulse Combining System Based on an All Fiber Active Control Method

Coherent Combining of Two Pulsed Solid State Lasers

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Tapered active fiber simultaneously enabled 141 W high average and 1.3 MW high peak power via all-fiber and polarization-maintained picosecond amplifier

Coherent beam combining of two all-PM thulium-doped fiber chirped pulse amplifiers

260 fs, 403 W coherently combined fiber laser with precise high-order dispersion management

Coherent Beam Combination of Ultrafast Fiber Lasers

Hybrid fiber-single crystal fiber chirped-pulse amplification system emitting more than 1.5 GW peak power with beam quality better than 1.3

Scalable structure of coherent polarization beam combining based on tapered diode laser amplifiers

High-power 0.4-mJ picosecond CPA system based on an extra-large-mode-area triple-clad fiber

Coherent synthesis of ultrashort pulse fiber laser based on balanced difference method

396 MHz CPA femtosecond laser system based on a single crystal fiber rod-type amplifier

A Hybrid Incoherent Sequence Combining of Pulsed Lasers Based on Refraction-Displacement-Pulsed-Combining and Polarization Beam Combining

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

Experimental Demonstration of Efficient Coherent Combining of 19 Fiber Lasers By Adaptive Gain Coefficient SPGD Algorithm

Microjoule Level Femtosecond Optical Pulses with Double-Cladding Fiber-Based Nonlinear Chirped-Pulse Amplification

A large dispersion-managed monolithic all-fiber chirped pulse amplification system for high-energy femtosecond laser generation

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

Amplification of 1.08 GHz Repetition Rate Femtosecond Laser Pulses to 97 W Average Power by a Fiber Amplifier

Combined Supercontinuum Source with >200 W Power Using a 3 × 1 Broadband Fiber Power Combiner.