Abstract:Utilizing solid waste to produce foam material has become a significant direction in resource recycling. This study focuses solely on using silicomanganese slag and feldspar tailings as raw materials, utilizing a powder sintering process to produce autocatalytic foaming glass–ceramic foam. We formulated four mix ratios based on the compositional characteristics of the silicomanganese slag and feldspar tailings. The study then explored the evolution of phase formation and macroscopic pore morphology under varying preparation temperatures. Moreover, through multi-phase co-melting experiments, this work unveiled the high-temperature molten mass generation mechanism between silicomanganese slag and feldspar tailings. Our findings reveal that the glass melt generated from silicomanganese slag particles and the 'solid–liquid erosion behavior' of feldspar particles play pivotal roles in the formation of high-temperature co-melt substances. As the sintering temperature increases, the mixed powder exhibits three different states of high-temperature molten mass, which are the reasons for the evolution of the macroscopic pore structure. It is suggested that the addition of silicomanganese slag should be less than 50 %, and the heat treatment temperature should be below 1145 °C in preparing glass–ceramic foam with silicomanganese slag and feldspar tailings. The sample with 40 % silicomanganese slag and 60 % feldspar tailings, treated at 1140 °C, yielded glass–ceramic foam with a compressive strength of 1.68 MPa, apparent density of 0.279 g/cm 3 , porosity of 81.7 %, and thermal conductivity of 0.074 W·m −1 ·K −1 . In summary, this study provides a novel approach for the high-value utilization of silicomanganese slag and offers an economical route for developing lightweight, eco-friendly structural materials.

High-porosity mullite ceramic foams prepared by selective laser sintering using fly ash hollow spheres as raw materials

Novel Mullite Ceramic Foams with High Porosity and Strength Using Only Fly Ash Hollow Spheres As Raw Material

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Preparation of ultra-light ceramic foams from waste glass and fly ash

Recycling of Silicomanganese Slag and Fly Ash for Preparation of Environment-Friendly Foamed Ceramics

Near-zero-shrinkage Al2O3 ceramic foams with coral-like and hollow-sphere structures via selective laser sintering and reaction bonding

High-strength, multifunctional and 3D printable mullite-based porous ceramics with a controllable shell-pore structure

Fabrication of Porous Mullite Ceramics with High Porosity Using Foam-Gelcasting

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

Effect of phase evolution and pyroplastic formation behavior on glass-ceramic foam derived from silicomanganese slag and feldspar tailings

Foam-gelcasting preparation and properties of high-strength mullite porous ceramics

A novel approach for preparing glass ceramic foams from MSWI fly ash: foaming characteristics and hierarchical pore formation mechanism

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent

Development of a Loose Powder Sintering Method for the Preparation of Porous Ceramic from Municipal Solid Waste Incineration Fly Ash

Preparation of ceramic foams from ceramic tile polishing waste and fly ash without added foaming agent

Mullite Ceramic Foams with Tunable Pores from Dual-Phase Sol Nanoparticle-Stabilized Foams

Preparation of eco-friendly porous ceramic with low thermal conductivity by high-temperature treatment of foamed solid waste based geopolymer with cenospheres

Preparation and characterization of ceramic foams mainly containing extracted titanium residues and silica tailings

Effects of Ammonium Molybdate Additive and Sintering Temperature on the Properties of Foam Ceramics Based on Ceramic Tile Polishing Waste

Selective laser sintering of porous Al2O3-based ceramics using both Al2O3 and SiO2 poly-hollow microspheres as raw materials