Study on the microwave dielectric properties of 0.84MgNb2-x(Ti1/2W1/2)xO6-0.16CaTiO3 ceramic
Yueming Li,Jiajun Huang,Binxuan Jiang,Yi Sun,Kai Li,Zongyang Shen,Zhumei Wang,Huanhuan Guo
DOI: https://doi.org/10.1007/s10854-024-13813-9
2024-11-18
Journal of Materials Science Materials in Electronics
Abstract:In order to meet the demand of high-quality microwave dielectric ceramics for the development of wireless communication, 0.84MgNb 2- x (Ti 1/2 W 1/2 ) x O 6 -0.16CaTiO 3 ( x = 0, 0.03, 0.05, 0.07, 0.09, 0.11) microwave dielectric ceramics were prepared by solid-phase method. The effects of phase structure, sintering properties, microstructure, and microwave dielectric properties of 0.84MgNb 2 O 6 -0.16CaTiO 3 ceramics in which the Nb 5+ ionic substituted with different contents of (Ti 1/2 W 1/2 ) 5+ were studied. The results indicate that the partial Nb 5+ in the 0.84MgNb 2- x (Ti 1/2 W 1/2 ) x O 6 -0.16CaTiO 3 nominal composition are replaced by the complex cations (Ti 1/2 W 1/2 ) 5+ in the crystal structure, and no new phase is produced. With the gradual increase of (Ti 1/2 W 1/2 ) 5+ addition, the bulk density of 0.84MgNb 2- x (Ti 1/2 W 1/2 ) x O 6 -0.16CaTiO 3 ceramics increased, the sintering temperature did not significantly change, the ceramic cell volume decreased, and the material polarizability and filling rate decreased, resulting in a decrease in the ceramics' dielectric constant ε r , the quality factor Q × f increases, and the frequency temperature coefficient τ f shifts to a positive value. The 0.84MgNb 1.95 (Ti 1/2 W 1/2 ) 0.05 O 6 -0.16CaTiO 3 ceramic with x = 0.05 composition sintered at 1250 °C for 4 h holding time has the best microwave dielectric properties: ε r = 21.52, Q × f = 96983 GHz, and τ f = − 3.8 × 10 –6 / °C.
engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied