Abstract:Wear‐resistant metal matrix composites (MMC) are common engineering materials which have been used for many industrial hardfacing applications. This work provides the detailed characterization of a laser‐clad MMC consisting of hard tungsten carbide particles embedded in a comparatively soft nickel alloy matrix, which has been intended to be used for potential rolling mill applications. Special focus of the investigations was placed on the relationship between the microstructure of the as‐deposited reinforcing particles and their hardness. Therefore, thermally induced dissolution of carbides caused by laser metal deposition (LMD) processing was studied. The methods of investigation include X‐ray diffraction (XRD), X‐ray micro‐computed tomography (μCT), transmission electron microscopy (TEM) with selected area electron diffraction (SAED), as well as scanning electron microscopy (SEM) combined with energy‐dispersive X‐ray spectroscopy (EDS), electron backscatter diffraction (EBSD) and nanoindentation. The as‐received powder blend mainly consisted of fused spherical particles of ditungsten carbides (W2C, W2C1–x) and monotungsten carbides (WC, WC1–x). Dissolution of large particles at the matrix/particle interfaces and fragmentation or even complete dissolution of small particles due to the high process temperature of LMD was observed. Primary W2C/W2C1–x phases were partially dissoluted and layers of secondary WC/NixWyC phases formed at the matrix/particle interfaces. As these surface layers were less hard than the as‐received particles, the local hardness gradually decreased from the inner region of the particles across the surface layer towards the matrix, which is supposed to improve bonding of particles inside the matrix. The hardness was dependent on the grain size and on the crystal structure of the carbides. Even when the crystal structures were identical, particles consisting of fine grains had considerably higher hardness than particles consisting of coarse grains. This article is protected by copyright. All rights reserved.

Microstructure characterization of cemented carbide fabricated by selective laser melting process

Microstructure Evolution of WC-20Co Cemented Carbide During Direct Selective Laser Melting

Microstructure and mechanical behavior of cemented carbide with Al alloy binder fabricated by selective laser melting

Selective laser sintering and spark plasma sintering of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide ceramics

Effect of laser parameters on microstructure and phase evolution of Ti-Si-C composites prepared by selective laser melting

Microstructural Characterization of Nanostructured WC-Co Cemented Carbides

Role of Co Content on Densification and Microstructure of WC–Co Cemented Carbides Prepared by Selective Laser Melting

Additive Manufacturing of Cemented Carbides Inserts with High Mechanical Performance

Melting and solidification dynamics during laser melting of reaction-based metal matrix composites uncovered by in-situ synchrotron X-ray diffraction

Microstructure and Phase Evolution of Ti-Al-C-Nb Composites Prepared by In Situ Selective Laser Forming

Precipitation, Transformation, and Coarsening of Carbides in a High-Carbon Ni-based Superalloy During Selective Laser Melting and Hot Isostatic Pressing Processes

Precipitating Behavior of in Situ Synthesized Multiple Carbide Particles in Laser Cladded MMC Coating

Microstructural Characterization and Micromechanical Properties of Dual-Phase Carbide in Arc-Melted Titanium Aluminide Base Alloy with Carbon Addition

Microstructure and mechanical properties of WC-12Co cemented carbide fabricated by laser powder bed fusion on a WC-20Co cemented carbide substrate

Microstructure and Fracture Toughness of a WC-Fe Cemented Carbide Layer Produced by a Diffusion-Controlled Reaction

Microstructures and Mechanical Properties of CrMnFeCoNi High Entropy Alloys Fabricated Using Laser Metal Deposition Technique

Microstructure and wear resistance of bimodal cemented carbide coating prepared by direct laser powder deposition

Microstructure characterization of nickel matrix composite reinforced with tungsten carbide particles and produced by laser cladding

Developing Cemented Carbides Through ICME

Microstructure Evolution of WC/steel Composite by Laser Surface Re-Melting

Preparation of Ti2AlC through in-situ selective laser forming and reaction sintering